Hoffer Flow Controls CAT1 Series, Руководство пользователя

Страница: 26 / 27

20 Appendix B – Communications
HP-310
System Commands Supported by Communications Messages
System
Command
Description/Response/Comments
OI Output 4mA
“ Output is 4mA.”
Current output set to 4mA.
MO
Output 12mA
“ Output is 12mA.”
Current output set to 12mA.
OM Output 20mA
“ Output is 20mA.”
Current output set to 20mA.
OF Output = Rate (Input)
“ Output equal to input.”
Current output follows rate.
AA
Auto Data
“F (DATA) R (DATA) T (DATA)”
The response, not the echo, is sent every two seconds until it
receives another message from the master. The
(DATA)
following the F denotes the frequency of the pulses to a
precision of three places past the decimal, the
(DATA)
following the R denotes the rate to a precision of three
places past the decimal, and the
(DATA)
following the T
denotes the total to a precision of three places past the
decimal.
DA Dump All
All of the responses in previous table.
The CAT1 gives all responses except for the CL command.
UI Unit Identification
“UNIT MODEL=HIT2A XX YY.ZZ”
Model and software number for the unit.
XX
is the hardware
revision number,
YY.ZZ
is the software revision where
YY
is the major software revision and
ZZ
is the minor software
revision.