www.hobiecat.com
E U R O P E
Ref : MM_TEDDY
Issued by : IR
Date : 01/2015
Up-date : 2
Page : 22/32
HOBIE TEDDY
ASSEMBLY MANUAL
Jib
Illustration
Steps Description
1
Unfold the jib and shackle the head onto the jib
halyard with the shackle provided. Fasten the clip
at the top of the jib to the forestay wire. Pull on the
halyard and raise the sail, fastening each clip to
the forestay in the process. When the sail is raised,
shackle the tack of the jib to the adjuster on top of
the furler. Fasten as low as possible.
2
Use the jib luff tensioner line to replace the jib
halyard.
3
The tensioner line can be fastened to the tack
shackle, fed up through the small block and then
cleated off at the cleat on the sail.
4
Ensure that the line is tight and cleated securely.
Enough tension should be applied to remove the
wrinkles from the luff of the sail.
The jib halyard line can be stored in the trampoline
pocket.