www.hobiecat.com
E U R O P E
Ref : MM_TEDDY
Issued by : IR
Date : 01/2015
Up-date : 2
Page : 19/32
HOBIE TEDDY
ASSEMBLY MANUAL
Jib furler
Illustration
Steps
Description
1
Take the jib tack line in the rope bag and the furler
in the rig bag.
Lead the jib halyard line to the small block on the
end of the jib halyard wire (that has been fixed at
the top of the mast at the previous step) Do a loop
and secure with a Figure 8 knot.
2
Shackle the jib furler to the bridles using the 6mm
shackle provided. Ensure that the exit hole in the
furler is pointing towards the furler cleat on the
front crossbar. Check that the screw on the under-
side of the furler is tight. This prevents the outer
cover from rotating.
3
Wind the furler up in a clockwise direction.
Leave enough furler line to reach the furler
cleat.