www.hobiecat.com
E U R O P E
Ref : MM_TEDDY
Issued by : IR
Date : 01/2015
Up-date : 2
Page : 17/32
HOBIE TEDDY
ASSEMBLY MANUAL
Trampoline assembly
Illustration
Steps
Description
5
Move to the front right corner of the trampoline.
Pull on the line as firmly as possible and tie a
bowline knot or loop in the line as close to the
trampoline edge as possible. This will enable a 4:1
purchase to be used for tensioning. Tie off once
tensioned to secure.
Now lead the end of the line through the eyestrap
on the rear of the front beam and back through the
loop. Lead the end back through the eyestrap and
apply as much tension as possible. Maintaining the
tension, lead the line through the grommet and
back to the eyestrap. Next, lead the line through
the grommet in the front edge of the trampoline
and tie off securely.
Repeat procedure for port side.
6
Retighten rear lacing from left to right. Tie the rear
lacing off securely at the eyelet posts on the right
hand end of the rear beam.
7
NB : It is important that the trampoline lacing is
kept very tight. Check the trampoline tension on a
regular basis.
Remember : all ropes streche!
