10. Built-in devices 169
3. More hot water.
Should you need more hot water, you can temporarily
increase the water temperature to approx. 65 °C. Press
the plus key "+".
(
The icon
is full.
After 30 minutes, the hot-water heater will switch back to
normal operation. If you have selected more hot water, the
circulation pump will continue to operate.
If the "Operation" function for the pump has been set to
"Cont", the function "Permanent pump operation" will be
disabled for 30 minutes, but then returns to permanent
pump operation.
You do not need to make any settings if you only require
hot water, for example in summer when no further heating
is required. The heating system will control this function
automatically.
Heating with electricity
Use the following procedure to activate the "Heating with elec-
tricity" function. The higher the selected output, the faster the
camper will heat up.
If electricity and gas are selected together, you can set whether
gas or electricity is to take priority
(see Tools menu)
. The boi-
ler uses no higher output than is required, even if 3 kW has
been selected.
1.
Starting and changing the different heating levels step by
step
(Off, 1 kW, 2 kW or 3 kW) with "+" or "-". The value
set will be displayed on the screen. When activated, the
plus icon is shown in green.
2.
To switch off the electric heating operation, keep pressing
the "-" key until you reach
Off.