10. Built-in devices 157
As soon as the heating has been switched on (room temperature
and hot water temperature have been activated) the fan speed
selected in the previous heating operation is displayed in the
status line. Manufacturer's default setting: “ECO”.
1)
Can lead to higher engine wear, depending on how often it
is selected.
2)
The “HIGH” fan speed has a higher current consumption,
higher noise level and higher engine wear.
Use the adjusting knob / pushbutton to select the icon in the
menu line
m
.
- Press to switch to the setting mode.
Setting the timer
- Use the adjusting knob / pushbut-
ton to set the hours and then the
minutes.
Entering the start time
- Use the adjusting knob / pushbut-
ton to set the hours and then the
minutes.
Entering the end time
The timer can only be selected if the clock on the control panel
has been set.
If the timer has been activated (ON), the menu item Activate timer
(OFF) is first displayed.
Danger of poisoning from exhaust fumes.
The activated preselection timer switches the heating on
even if the mobile home has been parked. In closed rooms
(such as garages, workshops) the exhaust fumes from the
heating can lead to poisoning. If the recreational vehicle is
parked in a closed room:
• close the fuel supply (gas) to the heating system;
• deactivate the preselection timer on the Truma CP plus
control panel (OFF);
• switch the heating off on the Truma CP plus control panel.
d
BOOST
To heat room rapidly
Available if the difference between the
selected and the actual room tempera-
ture is more than 10°C.
e
FUNKTION
KLIMA