6. Interior structure
53
Hanging table
To lower
• Raise the front end of the table top by approx. 30°.
• Pull down the lower part of the table leg
j
, fold it over by 90°
and lay it on its end.
• Fold out the supporting legs
k
by 90°.
• Pull the table top out of the upper wall brackets
l
.
• Raise the front end of the table top considerably and hook it
diagonally from above into the lower wall brackets
m
.
• Place the supporting legs at the front edge of the table top on
the floor.
3
2
1
4
Hanging table
Supporting legs
Lowered hanging table
6.4
How to convert seating areas into beds
Preparing to convert the bed
• Lower the table (
see Chapter 6.3 Tables
).
• If necessary, fold out the bed expansion in the seating area
(model-specific).
The seat groups can be converted into comfortable beds.
Converting the seating area to a bed
Converting the seating area
Pushlock safety catch
In the 515 UHK De Luxe model, the narrow section of the seating
area can be widened into a bed.
Bed extension in the seating area
(515 UHK De Luxe)
Conversion
• Press the outer panel
j
to unlock the bed extension.
• Lay the outer panel
l
fully on the floor in order to raise the
inner panel
k
.
• Hook the outer panel
l
underneath the groove of the inner
panel
k
.
Carry out this procedure in reverse order to convert the bed back
into the seating arrangement.
1
