9. Gas system
109
Gas regulator with a crash sensor
*
Using the DuoControl CS, it is possible to heat the caravan even
while driving.
Should there be an accident, the integrated crash sensor automatically
interrupts the gas supply, thereby preventing gas from escaping.
In an accident, the gas flow will be interrupted by a delay of 4.0 g ± 1.0
g that has an immediate and direct influence.
Please refer also to the manufacturer's separate operating
instructions.
When exchanging gas bottles, use the enclosed screw aid
to screw and unscrew the high-pressure hoses.
This will prevent damage to the screws, which can be
caused by using the wrong tools.
Cylinder valve
Gas bottle
Hose rupture protection
High-pressure hose
Gas filter
DuoControl CS
Reset button
Steel/copper pipe
Trigger element for crash sensor
Screw cap (test connection)
Tool to assist with screwing/unscrewing
Torx T20
Adjusting knob for bottle in use/reserve bottle
Status display for bottle in use/reserve bottle
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Example Diagram of DuoControl CS
1
2
3
4
5
6
7
8
10
13
14
To operate
• If necessary, open gas shutoff valves.
• Connect gas bottle(s)
k
and ensure that the hose con
-
nection is in perfect technical condition.
Open the valve
j
on the bottle.
• Press firmly for approx. 5 seconds on the hose rupture
protection
l
on the high-pressure hose.
Reset button in
“Not ready” position
7
To reset, press firmly on the yellow reset button , turn it lightly
in a clockwise direction and hold for 5 seconds until it stays in the
“Ready” position.
7
If the yellow reset button is not pressed (“Not ready” position) then
reset the crash sensor.
7
Reset button in
“Ready” position
7
