10. Built-in devices
125
Service menu
Show the version number of the heating or control panel.
To show the version number of the connected devices
Select the desired language from the languages available
(e.g. English, German, French, Italian).
Changing the language
Calibrating the temperature sensor (OFFSET)
The background illumination can be changed in 10 increments.
Changing the background illumination of the control panel
The room temperature sensor for the connected heating system can
be individually adjusted depending on where the sensor has been
installed. The offset can be set in increments of 0,5°C within a range
of 0°C to -5°C.
Setting the time
• Use the adjusting knob / pushbutton
q
to select the icon “Set-
ting the time” in the menu bar.
• The hours flash.
• Use the control knob / pushbutton
q
to set the hours (24-hour
mode).
• After pressing the control knob / pushbutton once again, the
minutes will blink.
• Use the adjusting knob / pushbutton
q
to set the minutes.
• Press the control knob / pushbutton
q
to confirm the time
entered.
