10. Built-in devices
123
Use the control knob / pushbutton
q
to select the icon in the
menu line
m
.
• Press to switch to the setting mode.
Setting the timer
• Use the control knob / pushbutton
q
to set the hours and then
the minutes.
Entering the start time
• Use the control knob / pushbutton
q
to set the hours and then
the minutes.
Entering the end time
The timer can only be selected if the clock on the control
panel has been set.
If the timer has been activated (ON), the menu item
Activate timer (OFF) is first displayed.
If the start/end time was exceeded during entry, the
operating parameters will only be taken into account
after the next start/end time has been reached. Until
then, the operating parameters set outside the timer
will remain valid.
Setting the room temperature
• Use the control knob / pushbutton
q
to select the desired
room temperature.
• Press the control knob / pushbutton
q
to confirm the tempera
-
ture.
Danger of poisoning from exhaust fumes.
The activated preselection timer switches the heating
on even if the caravan has been parked. In enclosed
spaces (such as garages, workshops) the exhaust fumes
from the heating can lead to poisoning. If the recreati-
onal vehicle is parked in an enclosed space:
• close the fuel supply (gas) to the heating system;
• Switch the Truma CP plus control panel off to pre-
vent the heating system from being switched on
again by the Truma app or preselection timer.
