Section 1 – Upper Frame Assembly
Parts List
Bag 1
5 X 10 X 4 Flanged Bearings X 2
Upper Main Shaft Bearing Block X 1
Lower Main Shaft Bearing Block X 1
Clutch Bell Bearing Block X 1
26mm Cross Members X 4
Outer Elevator Control Arm X 1
Inner Elevator Control X 1
Elevator Shaft X 1
Counter Gear X 1
Counter Gear Shaft X 1
Tail Pulley Gear X 1
Front Tail Transmission Bearing Blocks X 2
Swash Plate T-Lever X 2
Swash Plate T-Lever Mount X 2
M3-30 Cap Head Bolts X 2
M3 Lock Nuts X 2
M3-3 Set Screws X 3
M4-3 Set Screws X 1
M3-8 Cap Head Bolts X 28
M3-4 Pivot Ball Studs X 9
Frame Set Bag
Upper Frames X 2
Bag 1A – Servo Fixing Set
20 – M2.6-14 Cap Head Bolts
20 – M2.6 Lock Nuts
10 – Servo Fixing Plates
Step 1- Bearing Installation
Layout the frames as displayed in
picture
Install the (2)5 X 10 X 4 Flanged
bearings in the Upper Frame. The
Flange of the Bearing goes up. (You
may need to file out the holes if they
are too tight.)
