Quick 60 Features
1. Heavy Duty Frame Construction:
Quick 60 frames are made of
the highest Quality 2000 series Aluminum. These frames are not
only rigid but will provide excellent vibration absorption.
2. One-Way Hex Start Shaft System:
The one-way bearing allows
the engine to continue to run after the starter motor has been
stopped.
3. Ball Bearing Idler Pulley:
The ball bearing idler pulley provides
smooth consistent power to the tail by not allowing the belt to jump
teeth.
4. Belt driven Tail:
Belt Driven tail is not only a reliable way to drive
a tail, but is also very smooth and low maintenance.
5. High Quality Ball Bearings:
Quick 60 offers ball bearings on all
moving parts.
6. EMS Collective System:
The EMS Collective design allows ease
of setup with fewer moving parts. EMS constitutes overall design
simplicity and represents the future of helicopter technology.
7. Heavy-Duty Clutch System:
Based on the same design as our
famous heavy-duty clutch upgrade that fits most popular machines,
this clutch will give many years of problem free operation.
8. Control Linkages:
The control linkages that are provided with the
Quick 60 Kit are high quality 2.3mm stainless steel rods and the rod
ends are made of a high quality liquid Delrin.
9. Independent Blade Axle Design:
The dual blade axle
construction is pinned above and below the centerline of the main
blade grips. This rotor head design far exceeds the quality of any
rotor head on the market today.
10. Advanced Airfoil Fly-bar Paddles:
These paddles will provide
the best both kind of flight characteristics for both 3D & Sport flying.
Not only do they provide smooth forward flight, they also provide
quick response upon demand.
11. Rearward facing Engine Design:
This design provides quick
access to the glow plug and is advantageous for easy engine
removal.
