Section 4 – Completion of Lower Frame Assembly
Parts List
Bag 4
Fan Shroud x 1
66mm Cross-member x 1
9mm Cross-Spacer x 2
Landing Gear Skid Pipe Caps x 4
Fuel Tank Plate x 1
M3 Locknuts x 16
M2.6-6 Cap Head Bolts x 8
M3-10 Cap Head Bolts x 13
M3-12 Cap Head Bolts x 8
M3-18 Cap Head Bolts x 4
M3-20 Cap Head Bolts x 2
M3-3 Set Screws x 4
Bag 4A
Fuel Tank x 1
Rubber Fuel Stopper x 1
Aluminum fuel tubing x 3
Outside Stopper Plate x 1
Inside Stopper Plate x 1
M3 Aluminum Bolt x 1
Frame Bag
Frame Rails x 2
Fan Shroud Mount x 2
Loose in Kit Box
Landing Gear Struts x 2
Landing Gear Skid Pipes x 2
Step 1 – Fan Shroud Installation
Install Fan Shroud around the motor,
Bolt the two halves together using (3)
M3-10 Cap Head Bolts.
On the right side (Looking from the
front of the helicopter) Install Shroud
mount using 9mm Cross-spacer and
(2) M3-20 Cap Head Bolts.