Hobbico Husky ARF, Руководство пользователя

Страница: 8 / 44

8
2. Locate the two tiller arm collars and set
screws. One collar has two tapped holes on
each side plus the set screw hole. This one
goes on top
3. Install one of the collars on the wire and insert
the wire through the bracket. Put the other
collar on top.
Screw the two 4-40 screws each each side of
the top collar. Adjust the tiller arm so it is
square with the axle. Tighten both set set
screws and both bolts.
4. Cut the head off the 4-40 screws and install
the nylon pushrod ends.
5. Install the wheel and wheel collar.
6. Center the tail wheel bracket on the fuselage
with the bend at the very back.
Drill 1/16” holes and mount with the two #4 x
1/2” screws. The Tail wheel springs will be
mounted later.
MOUNTING STABILIZER
1. Collect the following items
(1) Stabilizers
(1) Fuselage
(1) Wing tube
(2) Wings