7
Main Landing Gear
1.
Collect the following items
(4) nylon landing gear straps
(8) #4 flat head screws
(4) 1/4” wheel collars
(8) cable ties
2.
Insert the pre-formed gear into the slots in the
bottom of the fuselage.
Center the nylon landing gear strap over the
gear and drill a 1/16” hole at each location.
3.
Mount the straps using the #4 x 1/2” flat head
screws.
4.
Install the wheels with a wheel collar on each
side.
5.
Install the gear fairing using the cable ties.
Start from the back side so the knot will be on
the back.
Tail Wheel
1.
Collect the following items
(1) Tail wheel bracket
(1) Wire bracket (axle)
(1) Rubber wheel
(2) Wheel collars with set screws
(2) #4 x 1/2” screws
(2) Tiller arm collars with set screws
(2) 4-40 x 1” screws
(2) nylon pushrod fittings
(2)steering springs
Содержание Husky ARF
Страница 41: ...VISIT US AT WWW CARLGOLDBERGPRODUCTS COM P O Box 818 Oakwood GA 30566 Phone 678 450 0085 Fax 770 532 2163...
Страница 42: ...VISIT US AT WWW CARLGOLDBERGPRODUCTS COM P O Box 818 Oakwood GA 30566 Phone 678 450 0085 Fax 770 532 2163...
Страница 43: ...VISIT US AT WWW CARLGOLDBERGPRODUCTS COM P O Box 818 Oakwood GA 30566 Phone 678 450 0085 Fax 770 532 2163...
