15
4.
You can make a hole in the firewall to pass the
ignition wires through.
5.
Drill a 3/16” hole in the firewall in line with your
throttle arm.
Attach the 2-56 x 12” pushrod with clevis and
silicone keeper to the throttle arm.
6.
Mount the throttle servo as shown. There is a
mount on both sides of the fuselage in case
your throttle is on the opposite side.
7.
Locate the e-z throttle connector and assem-
ble to your servo as shown.
Insert the pushrod into the connector and
attach servo arm to throttle servo. Adjust
servo for proper operation.
Note:
Before mounting the throttle servo skip
ahead to page 18 and install the fuselage strut attach-
ment brackets which require access through the
throttle servo mounting holes.
Содержание Husky ARF
Страница 41: ...VISIT US AT WWW CARLGOLDBERGPRODUCTS COM P O Box 818 Oakwood GA 30566 Phone 678 450 0085 Fax 770 532 2163...
Страница 42: ...VISIT US AT WWW CARLGOLDBERGPRODUCTS COM P O Box 818 Oakwood GA 30566 Phone 678 450 0085 Fax 770 532 2163...
Страница 43: ...VISIT US AT WWW CARLGOLDBERGPRODUCTS COM P O Box 818 Oakwood GA 30566 Phone 678 450 0085 Fax 770 532 2163...
