HMS MP6590, Руководство пользователя, Страница: 22 / 56

22
www.hms-fitness.pl
EN
4. Computer Post Installation
Connect the Sensor Wire (75) with Extension Sensor Wire (20).
Remove two Ø8×Ø16×1.5 Flat Washers (17) and two M8×30 Hexagon Bolts (23) from the Main Frame
(1).
Attach the Computer Post (2) onto the Main Frame (1) with two Ø8×Ø16×1.5 Flat Washers (17) and two M8×30
Hexagon Bolts (23). Tighten with the S6 Allen Wrench provided.
Connect the Extension Sensor Wire (20) with the wire of the Computer (19).
Remove two M5 ×10 Cross Pan Head Screws (22) from the Computer (19).
Then attach the Computer (19) onto the top end of Computer Post (2) use two M5×10 Cross Pan Head Screws (22).
Tighten with the Spanner with Phillips Screwdriver provided.
Functiona buttons:
MODE – Push down for selecting functions.If the long time holds down MODE button down for resetting
time, distance and calories.
Functions and operations:
1. SCAN – press MODE buton until SCAN appears, monitor will rotate through al. 6 funtions: time, speed,
distance, ODO, calories, pulse. Each display will be hold 5 seconds.
2. TIME – count the total time from the begining of the workout to its end.
3. SPEED – display current speed.
4. DIST – count the distance from the begining of the workout to its end.
5. CALORIES – count the total calories from the begining of the workout to its end.
6. ODO – count the total distance of all workouts.
7. PULSE – put your hands od the pusle sensors, press the MODE buton. After about 6-7 seconds, the current
heart rate will be displayed on the monitor.