Intesis
TM
Home Automation (WMP)
– Hisense VRF
User Manual r1.0 EN
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
17 / 24
9. Visit the Diagnostic section, enable COMMS () and check that there is communication activity, some TX frames
and some other RX frames. This means that the communication with the Home Automation Hub is OK. In case
there is no communication activity between Intesis and the Home Automation hub or controller, check that those
are operative: check the baud rate, the communication cable used to connect all devices and any other
communication parameter.
Figure 4.15
Enable COMMS
