Intesis
TM
Home Automation (WMP)
– Hisense VRF
User Manual r1.0 EN
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
13 / 24
•
OU address
. Address 1..64 of Outdoor Unit in Hisense H-Link bus.
•
Description
. Descriptive name to easy identification of the unit (for example, ‘living room floor 1 unit’, etc).
Additional to manual entry of each unit, autodiscover of present units in an H-Link installation is possible. To do so,
click button
Scan
. Following window will appear:
Figure 4.5
Intesis MAPS Scan Hisense Units window
By pressing
Scan
button, connected Hisense H-Link bus will be scanned for available units. Error window will appear
if there is a problem in the connection with H-
Link bus (units not powered, bus not connected, …).
A progress bar will appear during the scan, which will take up to a few minutes. After scan is complected, detected
units will be shown in available units as follows:
