HMS BE8510-i, Инструкция по эксплуатации, Страница: 29 / 58

28
“SPEED+”
、
“SPEED-” to set calorie from 10—999.
 After finish setting time,distance or calorie mode,you could press “ start “ to start the machine. there will be 3 seconds
countdown displayed on the window ! After countdown,the machine will run at the speed of 1.0km/h. You could press
“INCLINE
△
”
、
“INCLINE
▽
”
、
“SPEED+”
、
“SPEED-” to adjust speed and incline. Press “stop”,the machine will stop slowly.
Preset Program
There are 99 built-in programs P1-P99
， Under ready condition,press “PROG.” Key continuously,Window “PROGRAM” will display
“P1-P99”
，
FAT in turn. P1-P99 are built-
in programs . After selecting specific program, press “MODE”, Window “Time” displays
“30
：
00” and shining,you could press “INCLINE
△
”
、
“INCLINE
▽
”
、
“SPEED+”
、
“SPEED-” to set exercise time from 5
：
00
—99
：
00. After setting, press
“ START” to start the machine. Built-in programs have 18 parts,the time for each part=setting time / 18.
When machines come into next part,there will be a voice “Bi-Bi- Bi” to remind you,and speed and incline will be changed according
to the built-in progr
ams No matter whether you have pressed “INCLINE
△
”
、
“INCLINE
▽
”
、
“SPEED+”
、
“SPEED-” to change
speed and incline in front parts. After finishing one program, there will be voice “Bi-Bi- Bi”, the machine stop slowly and “End ” will
be displayed on the window. 5 sconds later, the machine will come into ready condition.
User-defined program

Setting for user-defined program
Under ready condition, press
“PROG.” Key continuously,Window “PROGRAM” will display “P1-P99”
，
U1-U2,FAT in turn.U1-U3 are
user-defined program
. After selecting U1,U2 or U3, press “MODE” to set, “SPEED+”
、
“SPEED-” to set speed, “INCLINE
△
”
、
“INCLINE
▽
” to set incline.After setting,press “MODE” key to finish one part and come into next part. After finishing setting for 18
parts,press “start” to start the machine. User-defined program will be keeped in the machine forever unless you reset them. These
data cann’t be lost even outage.

Special explain
Every mode has 16 parts.You can only press “START” key to start the machine after finishing all parts’ setting and total exercise
time setting.

Data range
Param Setting range Displayed range
Time(minute:scond) 5:00-99:00 0:00
－
99:59
Incline
（
%
）
0-22 0-22
Speed
（
KM/H
）
1.0-22 1.0-22
Distance(KM) 0.5-99.9 0.00
－
99.9
Heart rate(time/minute) N/A 40-250
calorie(cal) 10-999 0
－
999
Body fat test
：
Under ready condition, press “PROG.” Key continuously to come into FAT. Press “MODE” key,you could find “HEIGHT”
、
“WEIGHT” 、 “AGE” 、 “SEG” 、 “FAT” displayed on the window. Press “INCLINE
△
” 、 “INCLINE ▽ ” 、 “SPEED+” 、 “SPEED-” to set.
After setting,press “ MODE ” to come into “FAT”. At this time,put your hand on the heart pulse for 5-8 seconds, there will be body fat
date displayed on the window. You could find whether your weight and height matchs.
（ This data only for reference,cann’t be used
for medical data
）
Seg Boy Girl
Age 10------99
Height 100----240
Weight 20-----160
FAT
≤19
Underweight
FAT =(20---25) Normalweight
FAT =(25---29) Overweight
FAT
≥30
Obesity
Power save mode
：
Our machine have power save function.When you turn on power switch for 10 minutes and donn’t press any key,the machine will
come into power save mode and there is no light on the screen.You could press any key into ready condition.
“WARNING
Heart rate monitoring systems may be inaccurate. Over exercising may result in serious injury or death. If you feel faint
stop exercising immediately.”