7
Multiple modes may be required to cook recipes. To change modes during cooking cycles, simply turn the
Function Dial to select the new desired mode. Once the new mode is selected, begin the programming
process.
8
If the cooking pot is removed during the cooking cycle and then placed back into the unit, the cooking
process will continue as though it was not interrupted.
Troubleshooting Guide
POSSIBLE SOLUTION
“Err” Appears on the Display Screen
This occurs when power to the unit is interrupted or if the unit is plugged in and the function dial is not in the
“OFF” position.
Turn the function dial to “OFF” and then turn dial to desired cooking mode.
If the unit displays “Err” for a prolonged period of time due to power failure, dispose of the food for health and
safety reasons.
Call Customer Service.
“E02” Appears On The LED Display
Slow Function
Cooking System is not functioning. Please contact customer service.
Cleaning & Maintenance
The
Slow Function
Cooking System should be cleaned thoroughly after every use.
1.
Unplug the unit from the wall outlet.
2.
Never immerse the main housing in water or any other liquid.
3.
To clean the main housing and the control panel, wipe it clean with a damp cloth.
4.
The roasting lid and roasting rack are not dishwasher safe. Wash the cooking pot, roasting rack and roasting
lid with warm, soapy water. The cooking pot can be washed in the dishwasher.
5.
Dry all parts after each use.
6.
If food residue is stuck onto the cooking pot, fill the pot with water and allow to soak before cleaning.
DO
NO
T use scouring pads. If scouring is necessary, use a non-abrasive cleanser or liquid detergent with a
nylon pad or brush.
7.
Please return the unit to your distributor for any other servicing.
NOTE:
After usage, the exterior of the cooking pot may produce a black film when cleaned. This is due to
oxidation and occurs from normal usage.
Replacement Parts
To order additional parts and accessories, feel free to contact customer service.
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products. There is a separation of this waste
product into communities, you will need to inform your local authorities about the places where you can return
this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects
on the environment or human health and should be recycled. The symbol here indicates that electrical and
electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - [email protected] - [email protected] - Tél: +33 1 64 67 00 01
