Hiwin RCD403-GB, Руководство пользователя

Страница: 43 / 52

41
C19UC101-1801
Connection method:
The I/O connector of controller is
COM1, which is designed mistake-
proofing. If it cannot be plugged in,
please rotate and connect it again.
Plug the connector in and secure the
screw indeed.
DANGER
No signal or power supply should be close to or
in contact with any metal case. Wrong method of
using can cause a severe damage or loss of life
and property.
WARNING
To prevent the internal component from damage,
any wiring operation must be done only when the
controller is disconnected.
CAUTION
Please make sure the screws on the connector are
secured.