Hiwin HM-S, Руководство по сборке

Страница: 16 / 100

16
Options of the HM-S linear modules and HT-S linear tables
Assembly Instructions
Linear Axes HM-S and HT-S
HMS_HTS-01-0-EN-1905-MA
4.
Options of the HM-S linear modules and HT-S linear tables
4.1 Stroke length
The stroke lengths for the linear axes can be set to the millimetre.
The maximum stroke lengths depending on the series and size are listed in Table 4.1.
Please bear in mind that the maximum possible stroke is shorter with the following options:
Longer carriages (HM-S: carriage type L)
Second carriage (HM-S)
Type with cover strip (owing to required cover strip deflections)
If necessary, spindle supports
Table 4.1 Maximum stroke
Model Axis Maximum stroke [mm]
Linear module HM040B 3,000
HM060B 5,500
HM080B 5,500
HM120B 5,500
Linear table HT100S 2,600
HT150S 3,000
HT200S 3,500
HT250S 3,800
4.1.1 Reserve stroke
The reserve stroke L
r
equals the distance that can be travelled in addition to the stroke on both sides of the end positions
(stroke 0, stroke max) before the carriage reaches the mechanical end position (mechanical 0) at the installed dampers. The
reserve stroke for each axis size can be found in the catalogue„Linear Axes and Axis Systems HX“.
Fig. 4.1 Example reserve stroke on a linear axis
Reserve stroke L
r
Carriage position at mechanical 0
(buffer stop)
Carriage position at stroke 0
(sensor switching point)
Sensor switching point at stroke 0