FRA
DEU
ESP
РУС
21
i-basic 3
Manual
e di ins
tallazione, uso e manut
enzione
Ins
tallation, oper
ation and maint
enanc
e manual
Manuel d’ins
tallation, utilisation et et
entr
etien
Ins
tallation, bedienungs Und wartunghandbuch
Manual de ins
tallación, Uso y mant
enimient
o
Рук
ово
дс
тво по ус
тановк
е, Эк
сплуа
тации и т
ех. Обслуживанию
12_05_00_05
INDICACIONES LED
6
Manuale di installazione e uso
- Installation and user manual |
12_05_00_02
Cooling function
Heating function
Fan only function
Confirm choice by pressing the menu button.
PLEASE NOTE
: if the automatic/centralised season change mode has been selected (P09) the MODE
menu does not appear.
Select ECONOMY-COMFORT operating mode
Press the menu button, scroll the settings with the + button, confirm ECON with the menu button, by subse
-
quently pressing the + button, you can select one of the two operating modes: ECONOMY and COMFORT
ECONOMY
COMFORT
Confirm choice by pressing the menu button.
=
in COMFORT
mode the thermostat works according to the temperature setting
= if you activate the
ECONOMY
function you are setting a reduction in energy consumption changing
the temperature setpoint of the value set in the P10 parameter, reducing the setpoint for heating and
increasing it for cooling.
The same function can be activated, even in centralised mode, by closing the contact of pin 1 of the RJ45
connector, the function is disabled by opening the contact
Time and date clock setting
Press the menu button, scroll the settings with the + and confirm TIME with the menu button:
HRS:
the hour numbers flash, set the correct hour with the +/−, confirm with the menu button
MIN:
the minutes numbers flash, set the correct minutes with the +/−, confirm with the menu button
DAY:
the day numbers flash, set the correct day with the +/−, confirm with the menu button
MON:
the month numbers flash, set the correct month with the +/−, confirm with the menu button
YEA:
the year numbers flash, set the correct year with the +/−, confirm with the menu button
Weekly programming
Press the menu button, scroll the settings with the + and confirm PROG with the menu button:
Select the weekday to programme by scrolling with the + button:
SUN = Sunday
MON= Monday
TUE= Tuesday
WED= Wednesday
THU= Thursday
FRI= Friday
SAT= Saturday
REFRIGERACIÓN
- Termostato solicitado:
Led verde encendido con el ventila-
dor y la válvula abierta
Led verde intermitente (1 segundo
cada 2 segundos) con el ventilador
apagado y la válvula abierta (el venti-
lador espera la caída de la tempera-
tura del agua <15 °C)
- Se ha alcanzado el punto de ajuste
del termostato:
Led apagado (ventilador apagado y
válvula cerrada)
6
Manuale di installazione e uso
- Installation and user manual |
12_05_00_02
Cooling function
Heating function
Fan only function
Confirm choice by pressing the menu button.
PLEASE NOTE
: if the automatic/centralised season change mode has been selected (P09) the MODE
menu does not appear.
Select ECONOMY-COMFORT operating mode
Press the menu button, scroll the settings with the + button, confirm ECON with the menu button, by subse
-
quently pressing the + button, you can select one of the two operating modes: ECONOMY and COMFORT
ECONOMY
COMFORT
Confirm choice by pressing the menu button.
=
in COMFORT
mode the thermostat works according to the temperature setting
= if you activate the
ECONOMY
function you are setting a reduction in energy consumption changing
the temperature setpoint of the value set in the P10 parameter, reducing the setpoint for heating and
increasing it for cooling.
The same function can be activated, even in centralised mode, by closing the contact of pin 1 of the RJ45
connector, the function is disabled by opening the contact
Time and date clock setting
Press the menu button, scroll the settings with the + and confirm TIME with the menu button:
HRS:
the hour numbers flash, set the correct hour with the +/−, confirm with the menu button
MIN:
the minutes numbers flash, set the correct minutes with the +/−, confirm with the menu button
DAY:
the day numbers flash, set the correct day with the +/−, confirm with the menu button
MON:
the month numbers flash, set the correct month with the +/−, confirm with the menu button
YEA:
the year numbers flash, set the correct year with the +/−, confirm with the menu button
Weekly programming
Press the menu button, scroll the settings with the + and confirm PROG with the menu button:
Select the weekday to programme by scrolling with the + button:
SUN = Sunday
MON= Monday
TUE= Tuesday
WED= Wednesday
THU= Thursday
FRI= Friday
SAT= Saturday
CALEFACCIÓN
- Termostato solicitado:
Led rojo encendido con el ventilador
y la válvula abierta
Led rojo intermitente (1 segundo
cada 2 segundos) con el ventilador
apagado y la válvula abierta (el venti-
lador espera el aumento de la tempe-
ratura del agua >35 °C)
- Se ha alcanzado el punto de ajuste
del termostato:
Led apagado (ventilador apagado y
válvula cerrada)
FILTRO DE AIRE
- Led encendido amarillo/naranja =
filtro sucio (han transcurrido 800 ho
-
ras de funcionamiento del ventilador)
Procedimiento de reinicio del filtro
sucio:
hacer 5 transiciones rápidas
(no deben transcurrir más de tres se-
gundos entre cada una) entre la velo-
cidad mínima (I) y la media (II).
LED-ANZEIGEN
6
Manuale di installazione e uso
- Installation and user manual |
12_05_00_02
Cooling function
Heating function
Fan only function
Confirm choice by pressing the menu button.
PLEASE NOTE
: if the automatic/centralised season change mode has been selected (P09) the MODE
menu does not appear.
Select ECONOMY-COMFORT operating mode
Press the menu button, scroll the settings with the + button, confirm ECON with the menu button, by subse
-
quently pressing the + button, you can select one of the two operating modes: ECONOMY and COMFORT
ECONOMY
COMFORT
Confirm choice by pressing the menu button.
=
in COMFORT
mode the thermostat works according to the temperature setting
= if you activate the
ECONOMY
function you are setting a reduction in energy consumption changing
the temperature setpoint of the value set in the P10 parameter, reducing the setpoint for heating and
increasing it for cooling.
The same function can be activated, even in centralised mode, by closing the contact of pin 1 of the RJ45
connector, the function is disabled by opening the contact
Time and date clock setting
Press the menu button, scroll the settings with the + and confirm TIME with the menu button:
HRS:
the hour numbers flash, set the correct hour with the +/−, confirm with the menu button
MIN:
the minutes numbers flash, set the correct minutes with the +/−, confirm with the menu button
DAY:
the day numbers flash, set the correct day with the +/−, confirm with the menu button
MON:
the month numbers flash, set the correct month with the +/−, confirm with the menu button
YEA:
the year numbers flash, set the correct year with the +/−, confirm with the menu button
Weekly programming
Press the menu button, scroll the settings with the + and confirm PROG with the menu button:
Select the weekday to programme by scrolling with the + button:
SUN = Sunday
MON= Monday
TUE= Tuesday
WED= Wednesday
THU= Thursday
FRI= Friday
SAT= Saturday
KÜHLUNG
- Thermostat auf Anforderung:
Die grüne LED leuchtet bei einge-
schaltetem Gebläse und offenem
Ventil
Die grüne LED blinkt (alle 2 Sekun-
den 1 Sekunde), wenn das Gebläse
ausgeschaltet und das Ventil offen ist
(Gebläse wartet auf die Absenkung
der Wassertemperatur <15°C)
- Thermostat bei erreichtem Sollwert:
LED ausgeschaltet (Gebläse ausge-
schaltet und Ventil geschlossen)
6
Manuale di installazione e uso
- Installation and user manual |
12_05_00_02
Cooling function
Heating function
Fan only function
Confirm choice by pressing the menu button.
PLEASE NOTE
: if the automatic/centralised season change mode has been selected (P09) the MODE
menu does not appear.
Select ECONOMY-COMFORT operating mode
Press the menu button, scroll the settings with the + button, confirm ECON with the menu button, by subse
-
quently pressing the + button, you can select one of the two operating modes: ECONOMY and COMFORT
ECONOMY
COMFORT
Confirm choice by pressing the menu button.
=
in COMFORT
mode the thermostat works according to the temperature setting
= if you activate the
ECONOMY
function you are setting a reduction in energy consumption changing
the temperature setpoint of the value set in the P10 parameter, reducing the setpoint for heating and
increasing it for cooling.
The same function can be activated, even in centralised mode, by closing the contact of pin 1 of the RJ45
connector, the function is disabled by opening the contact
Time and date clock setting
Press the menu button, scroll the settings with the + and confirm TIME with the menu button:
HRS:
the hour numbers flash, set the correct hour with the +/−, confirm with the menu button
MIN:
the minutes numbers flash, set the correct minutes with the +/−, confirm with the menu button
DAY:
the day numbers flash, set the correct day with the +/−, confirm with the menu button
MON:
the month numbers flash, set the correct month with the +/−, confirm with the menu button
YEA:
the year numbers flash, set the correct year with the +/−, confirm with the menu button
Weekly programming
Press the menu button, scroll the settings with the + and confirm PROG with the menu button:
Select the weekday to programme by scrolling with the + button:
SUN = Sunday
MON= Monday
TUE= Tuesday
WED= Wednesday
THU= Thursday
FRI= Friday
SAT= Saturday
HEIZUNG
- Thermostat auf Anforderung:
Die rote LED leuchtet bei eingeschal-
tetem Gebläse und offenem Ventil
Die rote LED blinkt (alle 2 Sekunden
1 Sekunde), wenn das Gebläse
ausgeschaltet und das Ventil offen ist
(Gebläse wartet auf die Anhebung
der Wassertemperatur >35°C)
- Thermostat bei erreichtem Sollwert:
LED ausgeschaltet (Gebläse ausge-
schaltet und Ventil geschlossen)
LUFTFILTER
- Gelbe/orange LED eingeschaltet =
Filter verstopft (das Gebläse hat 800
Betriebsstunden erreicht)
Resetverfahren bei verschmutztem
Filter:
Nr. 5 schnelle Übergänge
(dazwischen sollten nicht mehr als
drei Sekunden vergehen) zwischen
der Mindestgeschwindigkeit (I) und
der durchschnittlichen Geschwin-
digkeit (II) ausführen.
СВЕТОДИОДНАЯ ИНДИКАЦИЯ
6
Manuale di installazione e uso
- Installation and user manual |
12_05_00_02
Cooling function
Heating function
Fan only function
Confirm choice by pressing the menu button.
PLEASE NOTE
: if the automatic/centralised season change mode has been selected (P09) the MODE
menu does not appear.
Select ECONOMY-COMFORT operating mode
Press the menu button, scroll the settings with the + button, confirm ECON with the menu button, by subse
-
quently pressing the + button, you can select one of the two operating modes: ECONOMY and COMFORT
ECONOMY
COMFORT
Confirm choice by pressing the menu button.
=
in COMFORT
mode the thermostat works according to the temperature setting
= if you activate the
ECONOMY
function you are setting a reduction in energy consumption changing
the temperature setpoint of the value set in the P10 parameter, reducing the setpoint for heating and
increasing it for cooling.
The same function can be activated, even in centralised mode, by closing the contact of pin 1 of the RJ45
connector, the function is disabled by opening the contact
Time and date clock setting
Press the menu button, scroll the settings with the + and confirm TIME with the menu button:
HRS:
the hour numbers flash, set the correct hour with the +/−, confirm with the menu button
MIN:
the minutes numbers flash, set the correct minutes with the +/−, confirm with the menu button
DAY:
the day numbers flash, set the correct day with the +/−, confirm with the menu button
MON:
the month numbers flash, set the correct month with the +/−, confirm with the menu button
YEA:
the year numbers flash, set the correct year with the +/−, confirm with the menu button
Weekly programming
Press the menu button, scroll the settings with the + and confirm PROG with the menu button:
Select the weekday to programme by scrolling with the + button:
SUN = Sunday
MON= Monday
TUE= Tuesday
WED= Wednesday
THU= Thursday
FRI= Friday
SAT= Saturday
ОХЛАЖДЕНИЕ
– Запрос термостата:
горит зеленый светодиод при
включенном
вентиляторе
и
открытом клапане.
Мигающий зеленый светодиод (1
секунда каждые 2 секунды) при
выключенном
вентиляторе
и
открытом клапане (вентилятор
ожидает, когда температура воды
опустится ниже 15 °C).
– Термостат после достижения
заданного значения:
светодиод не горит (вентилятор
выключен, клапан закрыт).
6
Manuale di installazione e uso
- Installation and user manual |
12_05_00_02
Cooling function
Heating function
Fan only function
Confirm choice by pressing the menu button.
PLEASE NOTE
: if the automatic/centralised season change mode has been selected (P09) the MODE
menu does not appear.
Select ECONOMY-COMFORT operating mode
Press the menu button, scroll the settings with the + button, confirm ECON with the menu button, by subse
-
quently pressing the + button, you can select one of the two operating modes: ECONOMY and COMFORT
ECONOMY
COMFORT
Confirm choice by pressing the menu button.
=
in COMFORT
mode the thermostat works according to the temperature setting
= if you activate the
ECONOMY
function you are setting a reduction in energy consumption changing
the temperature setpoint of the value set in the P10 parameter, reducing the setpoint for heating and
increasing it for cooling.
The same function can be activated, even in centralised mode, by closing the contact of pin 1 of the RJ45
connector, the function is disabled by opening the contact
Time and date clock setting
Press the menu button, scroll the settings with the + and confirm TIME with the menu button:
HRS:
the hour numbers flash, set the correct hour with the +/−, confirm with the menu button
MIN:
the minutes numbers flash, set the correct minutes with the +/−, confirm with the menu button
DAY:
the day numbers flash, set the correct day with the +/−, confirm with the menu button
MON:
the month numbers flash, set the correct month with the +/−, confirm with the menu button
YEA:
the year numbers flash, set the correct year with the +/−, confirm with the menu button
Weekly programming
Press the menu button, scroll the settings with the + and confirm PROG with the menu button:
Select the weekday to programme by scrolling with the + button:
SUN = Sunday
MON= Monday
TUE= Tuesday
WED= Wednesday
THU= Thursday
FRI= Friday
SAT= Saturday
НАГРЕВ
– Запрос термостата:
красный светодиод горит при
включенном
вентиляторе
и
открытом клапане.
Мигающий красный светодиод (1
секунда каждые 2 секунды) при
выключенном
вентиляторе
и
открытом клапане (вентилятор
ожидает, когда температура воды
поднимется выше 35 °C).
– Термостат после достижения
заданного значения:
светодиод не горит (вентилятор
выключен, клапан закрыт).
ВОЗДУШНЫЙ ФИЛЬТР
– Светодиод горит желтым/
оранжевым светом = загрязнен
фильтр (прошло 800 часов работы
вентилятора)
Процедура сброса загрязненного
фильтра:
выполнить 5 быстрых переключений
между минимальной (I) и средней
(II)
скоростью
(между
переключениями должно пройти не
более трех секунд).
INDICATIONS LED
6
Manuale di installazione e uso
- Installation and user manual |
12_05_00_02
Cooling function
Heating function
Fan only function
Confirm choice by pressing the menu button.
PLEASE NOTE
: if the automatic/centralised season change mode has been selected (P09) the MODE
menu does not appear.
Select ECONOMY-COMFORT operating mode
Press the menu button, scroll the settings with the + button, confirm ECON with the menu button, by subse
-
quently pressing the + button, you can select one of the two operating modes: ECONOMY and COMFORT
ECONOMY
COMFORT
Confirm choice by pressing the menu button.
=
in COMFORT
mode the thermostat works according to the temperature setting
= if you activate the
ECONOMY
function you are setting a reduction in energy consumption changing
the temperature setpoint of the value set in the P10 parameter, reducing the setpoint for heating and
increasing it for cooling.
The same function can be activated, even in centralised mode, by closing the contact of pin 1 of the RJ45
connector, the function is disabled by opening the contact
Time and date clock setting
Press the menu button, scroll the settings with the + and confirm TIME with the menu button:
HRS:
the hour numbers flash, set the correct hour with the +/−, confirm with the menu button
MIN:
the minutes numbers flash, set the correct minutes with the +/−, confirm with the menu button
DAY:
the day numbers flash, set the correct day with the +/−, confirm with the menu button
MON:
the month numbers flash, set the correct month with the +/−, confirm with the menu button
YEA:
the year numbers flash, set the correct year with the +/−, confirm with the menu button
Weekly programming
Press the menu button, scroll the settings with the + and confirm PROG with the menu button:
Select the weekday to programme by scrolling with the + button:
SUN = Sunday
MON= Monday
TUE= Tuesday
WED= Wednesday
THU= Thursday
FRI= Friday
SAT= Saturday
REFROIDISSEMENT
- Thermostat sur demande:
LED verte allumée avec ventilateur
en marche et vanne ouverte
LED verte clignotante (1 seconde tou-
tes les 2 secondes) avec ventilateur
éteint et vanne ouverte (ventilateur
attendant que la température de l’e-
au baisse <15°C)
- Thermostat avec point de réglage
atteint:
Led éteinte (ventilateur éteint et van-
ne fermée)
6
Manuale di installazione e uso
- Installation and user manual |
12_05_00_02
Cooling function
Heating function
Fan only function
Confirm choice by pressing the menu button.
PLEASE NOTE
: if the automatic/centralised season change mode has been selected (P09) the MODE
menu does not appear.
Select ECONOMY-COMFORT operating mode
Press the menu button, scroll the settings with the + button, confirm ECON with the menu button, by subse
-
quently pressing the + button, you can select one of the two operating modes: ECONOMY and COMFORT
ECONOMY
COMFORT
Confirm choice by pressing the menu button.
=
in COMFORT
mode the thermostat works according to the temperature setting
= if you activate the
ECONOMY
function you are setting a reduction in energy consumption changing
the temperature setpoint of the value set in the P10 parameter, reducing the setpoint for heating and
increasing it for cooling.
The same function can be activated, even in centralised mode, by closing the contact of pin 1 of the RJ45
connector, the function is disabled by opening the contact
Time and date clock setting
Press the menu button, scroll the settings with the + and confirm TIME with the menu button:
HRS:
the hour numbers flash, set the correct hour with the +/−, confirm with the menu button
MIN:
the minutes numbers flash, set the correct minutes with the +/−, confirm with the menu button
DAY:
the day numbers flash, set the correct day with the +/−, confirm with the menu button
MON:
the month numbers flash, set the correct month with the +/−, confirm with the menu button
YEA:
the year numbers flash, set the correct year with the +/−, confirm with the menu button
Weekly programming
Press the menu button, scroll the settings with the + and confirm PROG with the menu button:
Select the weekday to programme by scrolling with the + button:
SUN = Sunday
MON= Monday
TUE= Tuesday
WED= Wednesday
THU= Thursday
FRI= Friday
SAT= Saturday
CHAUFFAGE
- Thermostat sur demande:
LED rouge allumée avec ventilateur
en marche et vanne ouverte
LED rouge clignotante (1 seconde to-
utes les 2 secondes) avec ventilateur
éteint et vanne ouverte (ventilateur
attendant que la température de l’e-
au augmente >35°C)
- Thermostat avec point de réglage
atteint:
Led éteinte (ventilateur éteint et van-
ne fermée)
FILTRE AIR
- Led jaune/orange = filtre sale (800
heures de fonctionnement du ventila-
teur se sont écoulées)
Procédure de réinitialisation filtre
sale:
effectuer 5 transitions rapides
(entre l’une et l’autre pas plus de
trois secondes ne doivent s’écouler)
entre les vitesses minimale (I) et mo-
yenne (II).
