manualshive.com logo in svg

Hitachi ZW 120-6, Руководство оператора

Поделиться
Скачать
Hitachi ZW 120-6 Скачать руководство пользователя страница 69

OPERATOR'S STATION

1-11

Parking Brake Indicator (Red)

The parking brake indicator will light when the parking brake 
is applied. 
If the forward/reverse lever is moved to either the forward (F) 
or the reverse (R) position when the parking brake is applied, 
the alarm buzzer will sound. Return the forward/reverse lever 
to neutral (N) and release the parking brake.

Brake Oil Level Indicator (Red)

d

WARNING:  Stop machine operation if the brake oil 

level decreases. Failure to do so may result in personal 
injury or death. If the indicator comes ON, immediately 
stop machine operation.

If the brake oil level becomes low, the brake oil level indicator 
and the service indicator will light, and the alarm buzzer will 
sound.
Immediately move the machine to a safe area, set the machine 
in the park position and stop the engine. Inspect the brake 
system for any leakage.

M4GB-01-012

M4GB-01-014

Содержание ZW 120-6













































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды