Hitachi Zaxis 33U-5A Скачать руководство пользователя

Страница: 329 / 340

13-27

CAB TILTING MECHANISM

OPTIONAL ATTACHMENT

Floor Tilt Up Procedure

1. After operating the machine, wait for the machine to

sufficiently cool.

2. Park the machine on a level surface.

3. Lower the blade.

4. After rolling the arm and the bucket in, lower the bucket

on a wooden block down to the ground.

5. Face the front attachment straightforward toward the

machine without swinging the front attachment at this
time.

6. Stop the engine. Remove the key from the key switch.

7. Close the cab (optional) door.

IMPORTANT: Remove bolt (1) and cover (2). If the floor is

tilted up with cover (2), damage to cover (2), floor and
the cab tilting device may result.

8. Remove bolt (1) and cover (2).

9. Remove bolt (3). Loosen bolt (4) and remove cover (5).

ZX33U-5A, 38U-5A

ZX48U-5A, 55U-5A, 65USB-5A

Ground

Level

MADB-13-018

MADB-13-019

MADB-13-045

Содержание Zaxis 33U-5A





















































































































































































































































































































































Результаты поиска

Содержание Zaxis 33U-5A

Отзывы:

Похожие инструкции для Zaxis 33U-5A

Бренды по названию

Популярные бренды

Hitachi Zaxis 33U-5A, Руководство оператора

Результаты поиска

Содержание Zaxis 33U-5A

Отзывы:

Похожие инструкции для Zaxis 33U-5A

Бренды по названию

Популярные бренды