Hitachi Zaxis 33U-5A Скачать руководство пользователя страница 34

Страница: 34 / 340

Object Handling



If a lifted load should fall, any person nearby may be

struck by the falling load or may be crushed underneath it,

resulting in serious injury or death.



When using the machine for craning operations, be sure

to comply with all local regulations.



Do not use damaged chains or frayed cables, sables,

slings, or ropes.



Before craning, position the upperstructure with the

travel motors at the rear.



Move the load slowly and carefully. Never move it

suddenly.



Keep all persons well away from the load.



Never move a load over a person’s head.



Do not allow anyone to approach the load until it is safely

and securely situated on supporting blocks or on the

ground.



Never attach a sling or chain to the bucket teeth. They

may come off, causing the load to fall.

Protect Against Flying Debris



If flying debris hit eyes or any other part of the body, serious

injury may result.



Guard against injury from flying pieces of metal or debris;

wear goggles or safety glasses.



Keep bystanders away from the working area before

striking any object.

SAFETY

S-22

SA-432

SA-014

Содержание Zaxis 33U-5A





















































































































































































































































































































































Результаты поиска

Содержание Zaxis 33U-5A

Отзывы:

Похожие инструкции для Zaxis 33U-5A

Бренды по названию

Популярные бренды

Hitachi Zaxis 33U-5A, Руководство оператора

Результаты поиска

Содержание Zaxis 33U-5A

Отзывы:

Похожие инструкции для Zaxis 33U-5A

Бренды по названию

Популярные бренды