Hitachi Zaxis 33U-5A Скачать руководство пользователя

Страница: 31 / 340

SAFETY

S-19

Avoid Undercutting



In order to retreat from the edge of an excavation if the

footing should collapse, always position the undercarriage

perpendicular to the edge of the excavation with the travel

motors at the rear.



If the footing starts to collapse and if retreat is not

possible, do not panic. Often, the machine can be secured

by lowering the front attachment, in such cases.

Avoid Tipping

DO NOT ATTEMPT TO JUMP CLEAR OF TIPPING MACHINE
--- SERIOUS OR FATAL CRUSHING INJURIES WILL RESULT

MACHINE WILL TIP OVER FASTER THAN YOU CAN JUMP
FREE

FASTEN YOUR SEAT BELT



The danger of tipping is always present when operating on

a grade, possibly resulting in serious injury or death.

To avoid tipping:



Be extra careful before operating on a grade.



Prepare machine operating area flat.



Keep the bucket low to the ground and close to the

machine.



Reduce operating speeds to avoid tipping or slipping.



Avoid changing direction when traveling on grades.



NEVER attempt to travel across a grade steeper than 15

degrees if crossing the grade is unavoidable.



Reduce swing speed as necessary when swinging loads.



Be careful when working on frozen ground.



Temperature increases will cause the ground to become

soft and make ground travel unstable.

SA-1300

SA-1301

Содержание Zaxis 33U-5A





















































































































































































































































































































































Результаты поиска

Содержание Zaxis 33U-5A

Отзывы:

Похожие инструкции для Zaxis 33U-5A

Бренды по названию

Популярные бренды

Hitachi Zaxis 33U-5A, Руководство оператора

Результаты поиска

Содержание Zaxis 33U-5A

Отзывы:

Похожие инструкции для Zaxis 33U-5A

Бренды по названию

Популярные бренды