Hitachi Zaxis 33U-5A Скачать руководство пользователя страница 13

Страница: 13 / 340

Recognize Safety Information



These are the

SAFETY ALERT SYMBOLS



When you see these symbols on your machine or in this

manual, be alert to the potential for personal injury.



Follow recommended precautions and safe operating

practices.

Understand Signal Words



On machine safety signs, signal words designating the

degree or level of hazard - DANGER, WARNING, or CAUTION
- are used with the safety alert symbol.



DANGER

indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.



WARNING

indicates a potentially hazardous situation

which, if not avoided, could result in death or serious
injury.



CAUTION

indicates a potentially hazardous situation

which, if not avoided, may result in minor or moderate
injury.



DANGER or WARNING

safety signs

are located near

specific hazards. General precautions are listed on

CAUTION safety signs.



Some safety signs do not use any of the designated signal

words above after the safety alert symbol are occasionally
used on this machine.



To avoid confusing machine protection with personal

safety messages, a signal word

IMPORTANT

indicates a

situation which, if not avoided, could result in damage to
the machine.



NOTE

: indicates an additional explanation for an

element of information.

S-1

SAFETY

SA-688

SA-1223

Содержание Zaxis 33U-5A





















































































































































































































































































































































Результаты поиска

Содержание Zaxis 33U-5A

Отзывы:

Похожие инструкции для Zaxis 33U-5A

Бренды по названию

Популярные бренды

Hitachi Zaxis 33U-5A, Руководство оператора

Результаты поиска

Содержание Zaxis 33U-5A

Отзывы:

Похожие инструкции для Zaxis 33U-5A

Бренды по названию

Популярные бренды