-33-
Set the rotation switch-over lever on
housing (A) to "P" before reassembly.
Controller
[46] <43>
Terminal support
Pass the internal wire (brown) between the
housing and the Controller
[46] <43>
.
Pass the internal wire (red) first then the
internal wire (brown) between the ribs.
Pass the internal wire (white)
between the ribs.
Fig. 13
Internal wire (white)
Internal wire (brown)
Internal wire for LED light
Put the internal wire (red) in this groove.
Internal wire (white)
Internal wire (black)
Internal wire (brown)
Terminal support LD terminal
Terminal support (-) terminal
Do not bend the internal wire
toward the noise suppressor.
Terminal support (+) terminal
D
D
A-A