English
10
b)
Use
power
tools
only
with
speci
fi
cally
designated
battery
packs.
Use of any other battery packs may create a risk of
injury and
fi
re.
c)
When
battery
pack
is
not
in
use,
keep
it
away
from
other
metal
objects
like
paper
clips,
coins,
keys,
nails,
screws,
or
other
small
metal
objects
that
can
make
a
connection
from
one
terminal
to
another.
Shorting the battery terminals together may cause
burns or a
fi
re.
d)
Under
abusive
conditions,
liquid
may
be
ejected
from
the
battery;
avoid
contact.
If
contact
accidentally
occurs,
fl
ush
with
water.
If
liquid
contacts
eyes,
additionally
seek
medical
help.
Liquid ejected from the battery may cause irritation or
burns.
6)
Service
a)
Have
your
power
tool
serviced
by
a
quali
fi
ed
repair
person
using
only
identical
replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep
children
and
in
fi
rm
persons
away.
When
not
in
use,
tools
should
be
stored
out
of
reach
of
children
and
in
fi
rm
persons.
CORDLESS
IMPACT
DRIVER
SAFETY
WARNINGS
1.
Hold
power
tool
by
insulated
gripping
surfaces,
when
performing
an
operation
where
the
fastener
may
contact
hidden
wiring.
Fasteners contacting a
“live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
2. This is portable tool for tightening and loosenig screws.
Use it only for these operation.
3. Use the earplugs if using for a long time.
4. One-hand operation is extremely dangerous; hold the
unit
fi
rmly with both hands when operating.
5. After installing the driver bit, pull lightly out the bit to make
sure that it does not come loose. If the bit is not installed
properly, it can come loose during use, which can be
dangerous.
6. Use the bit that matches the screw.
7. Tightening a screw with the impact driver at an angle to
that screw can damage the head of the screw and the
proper force will not be transmitted to the screw. Tighten
with this impact driver lined up straight with the screw.
8. Always charge the battery at a temperature of 0°C –
40°C. A temperature of less than 0°C will result in over
charging which is dangerous. The battery cannot be
charged at a temperature higher than 40°C.
The most suitable temperature for charging is that of
20°C – 25°C.
9. Do not use the charger continuously.
When one charging is completed, leave the charger for
about 15 minutes before the next charging of battery.
10. Do not allow foreign matter to enter the hole for
connecting the rechargeable battery.
11.
Never disassemble the rechargeable battery and
charger.
12. Never short-circuit the rechargeable battery. Short-
circuiting the battery will cause a great electric current
and overheat. It results in burn or damage to the battery.
13. Do not dispose of the battery in
fi
re.
If the battery is burnt, it may explode.
14. Do not insert object into the air ventilation slots of the
charger.
Inserting metal objects or in
fl
ammables into the charger
air ventilation slots will result in electrical shock hazard or
damaged charger.
15. Bring the battery to the shop from which it was purchased
as soon as the post-charging battery life becomes too
short for practical use. Do not dispose of the exhausted
battery.
16. Using an exhausted battery will damage the charger.
CAUTION
ON
LITHIUM
-
ION
BATTERY
To extend the lifetime, the lithium-ion battery equips with the
protection function to stop the output.
In the cases of 1 to 3 described below, when using this
product, even if you are pulling the switch, the motor may
stop. This is not the trouble but the result of protection
function.
1. When the battery power remaining runs out, the motor
stops.
In such a case, charge it up immediately.
2. If the tool is overloaded, the motor may stop. In this
case, release the switch of tool and eliminate causes of
overloading. After that, you can use it again.
3. If the battery is overheated under overload work, the
battery power may stop.
In this case, stop using the battery and let the battery
cool. After that, you can use it again.
Furthermore, please heed the following warning and caution.
WARNING
In order to prevent any battery leakage, heat generation,
smoke emission, explosion and ignition beforehand, please
be sure to heed the following precautions.
1. Make sure that swarf and dust do not collect on the
battery.
○
During work make sure that swarf and dust do not fall on
the battery.
○
Make sure that any swarf and dust falling on the power
tool during work do not collect on the battery.
○
Do not store an unused battery in a location exposed to
swarf and dust.
○
Before storing a battery, remove any swarf and dust that
may adhere to it and do not store it together with metal
parts (screws, nails, etc.).
2. Do not pierce battery with a sharp object such as a
nail, strike with a hammer, step on, throw or subject the
battery to severe physical shock.
3. Do not use an apparently damaged or deformed battery.
4. Do not use the battery in reverse polarity.
5. Do not connect directly to an electrical outlets or car
cigarette lighter sockets.
6. Do not use the battery for a purpose other than those
speci
fi
ed.
7. If the battery charging fails to complete even when a
speci
fi
ed recharging time has elapsed, immediately stop
further recharging.
8. Do not put or subject the battery to high temperatures or
high pressure such as into a microwave oven, dryer, or
high pressure container.
9. Keep away from
fi
re immediately when leakage or foul
odor are detected.
10. Do not use in a location where strong static electricity
generates.
000Book̲WH14DBEL̲C99209791̲305̲EE.indb 10
000Book̲WH14DBEL̲C99209791̲305̲EE.indb 10
2013/06/13 12:05:07
2013/06/13 12:05:07
