Hitachi VTMX110EUK, Руководство по эксплуатации

Страница: 12 / 36

Sorting TV channels automatically
(Follow TV)
When the automatic channel search function is activated, the
TV channels are saved in a specific order. This may vary from
the order of TV channels on the TV set.
This only works if the video recorder (socket
EXT.1 AV. 1
)
and the TV set are connected with a scart cable .
What does EASYLINK do?
If your TV set supports 'Easylink,...', TV channels will be
saved during the initial installation in the same order as they
appear on the TV set. To save the TV channels in a
different order, you must change the order on the TV set.
When you start Follow TV, the information then is
re-transferred from the TV set.
1
Switch on the TV set. If required, select the programme
number for the video recorder.
2
Press the
MENU
button on the remote control. The main
menu will appear.
MENU
CLOCK
AUTO INSTALL
MANUAL SEARCH
FOLLOW TV
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
VIDEOSYSTEM
SPECIAL SETTINGS
________________________________
…EXITpMENU
OK
†
3
Select line '
FOLLOW TV
' using
P-
= or ;
P+
and
confirm with
OK
.
4
Press the
MENU
button on the remote control.
5
In the display, select '
FOLLOW TV
' (FOLLOW TV) with
P-
= or ;
P+
.
I cannot switch my TV set to programme number '1'
* If you have connected additional devices to socket
EXT.2 AV. 2
, please disconnect these devices. Because of
other connected devices, the TV set could switch to the
programme number of the scart socket.
6
Confirm with
OK
on the video recorder remote control.
The video recorder compares the TV channels on the TV
set and the video recorder.
If the video recorder finds the same TV channel as on the
TV set, then it stores it at 'P01'.
'
NOTV
' will appear in the display. The video recorder is
not receiving a video signal from the TV set.
* Check the plug on the scart cable.
* Check your TV's operating instructions to see which scart
socket is used for video signals.
* If this does not help, it's not possible to use this function.
Please read the section 'Sorting TV channels manually'.
7
Wait until the next number, e.g. '
TV02
' appears in the
display.
8
Select the next programme number on the TV set , e.g.
'2'.
9
Confirm with
OK
on the video recorder remote control.
Deleting sorting
You can delete an incorrect TV channel sorting by pressing
CLEAR (CL)
.
0
Repeat steps
7
to
9
until you have assigned a
programme number to all TV channels.
A
To end, press
MENU
.
9