Hitachi Simple Modular Storage 100 Скачать руководство пользователя страница 43

Страница: 43 / 100

Installing Your Array

3–9

Hitachi Simple Modular Storage 100 User’s Guide

Optional Items

An Ethernet switch and Ethernet cable are required to use your Hitachi

Simple Modular Storage 100 in a switch (fabric) topology.

•

Installing the Hitachi Simple Modular Storage 100

Installing your Hitachi Simple Modular Storage 100 involves the following

steps:
1. Installing your Hitachi Simple Modular Storage 100 on a table or shelf or

in a rack. See the sections below.

2. Attaching the front panel bezel. See page

3-12

3. Connecting to the 10/100 Ethernet management ports. See page

3-14

4. Connecting to the iSCSI Gigabit Ethernet Data Ports. See page

3-15

5. Connecting power. See page

3-16

Installing on a Table or Shelf

If installing your Hitachi Simple Modular Storage 100 on a table or shelf:
• Place your Hitachi Simple Modular Storage 100 near an AC power

source.

• Allow enough ventilation space between your Hitachi Simple Modular

Storage 100 and other objects in the vicinity.

• Be sure the air vents on the front and back of the your Hitachi Simple

Modular Storage 100 enclosure are not blocked.

Rack-Mounting the Hitachi Simple Modular Storage 100

Your Hitachi Simple Modular Storage 100 can be mounted in a standard 19-

inch rack. The rack-mount and/or rail kit hardware must be carefully

selected to support the equipment properly. Follow the instructions in the

documentation for the rack and/or rail kit. For more information, please

contact your place of purchase.

The following procedure provides general guidelines to follow when

installing your Hitachi Simple Modular Storage 100 in a rack.

•

WARNING! Three or more persons are required to lift your Hitachi

Simple Modular Storage 100. Grasp the enclosure from the bottom

and lift with both hands. To prevent injury, keep your back straight

and lift with your legs, not your back.

WARNING! Three or more persons are required to lift your Hitachi

Simple Modular Storage 100. Grasp the enclosure from the bottom

and lift with both hands. To prevent injury, keep your back straight

and lift with your legs, not your back.

DANGER!

Before mount your Hitachi Simple Modular Storage 100 in a

rack, be sure the rack is secure and is in no danger of falling over.

Содержание Simple Modular Storage 100





































































































Результаты поиска

Содержание Simple Modular Storage 100

Отзывы:

Похожие инструкции для Simple Modular Storage 100

Бренды по названию

Популярные бренды

Hitachi Simple Modular Storage 100, Руководство пользователя

Результаты поиска

Содержание Simple Modular Storage 100

Отзывы:

Похожие инструкции для Simple Modular Storage 100

Бренды по названию

Популярные бренды