Hitachi MP-WU8101B Скачать руководство пользователя

Страница: 38 / 146

3 8

QM00971-1

Setting up

Connecting to a power supply (continued)

►Do not connect the projector to a power supply while no lens

unit is attached to it.

►Use extra caution when connecting the power cord, as incorrect or faulty

connections may result in fire and/or electrical shock.

• Do not touch the power cord with a wet hand.

• Only use the power cord that came with the projector. If it is damaged, consult

your dealer to get a new one. Never modify the power cord. The power cord that

came with the projector is only for this projector. Do not use it for other devices.

• Only plug the power cord into an outlet whose voltage is matched to the power

cord. The power outlet should be close to the projector and easily accessible.

Remove the power cord for complete separation.

• Do not distribute the power supply to multiple devices. It may overload the

outlet and connectors or loosen the connection. A loose connection in the plug

could result in burns or accidents due to heat generation of the plug.

• Do not place the projector or heavy objects on the power cord and cables.

• Connect the ground terminal for the AC inlet of this unit to the ground terminal

of the building using an appropriate power cord (bundled).

• Do not use the power cord remaining tied together. It could result in high

temperature, fire and smoke.

• This projector is also designed for IT power systems with a phase-

to-phase voltage of 220 to 240 V.

WARNING

NOTICE

Содержание MP-WU8101B



















































































































































Результаты поиска

Содержание MP-WU8101B

Отзывы:

Похожие инструкции для MP-WU8101B

Бренды по названию

Популярные бренды

Hitachi MP-WU8101B, Руководство пользователя

Результаты поиска

Содержание MP-WU8101B

Отзывы:

Похожие инструкции для MP-WU8101B

Бренды по названию

Популярные бренды