16
QM00971-1
Introduction
Part names
Projector
(1) Filter cover (
124
)
The air fi lter and intake vent
are inside.
(2) Elevator feet (x2) (
48
)
(3) Remote sensors (x2) (
41
,
110
)
(4) Lens hole cover
(5) Indicators (
17
)
(6) Intake vents
(7) Control panel (
17
)
(8)
AC
(AC inlet) (
37
)
(9) Exhaust vents
(10) Ports (
18
)
(11) Security bar (
36
)
(12) Security slot (
36
)
(13) Safety bar (
36
)
(14) Battery cover (
126
)
►Do not open or remove any portion of the projector, unless
the manuals direct it.
►Do not subject the projector to unstable conditions.
►Do not apply a shock or pressure to this projector. Remove all the attachments
including the power cord and cables, from the projector when carrying the projector.
►Do not look into the lens and the openings on the projector while the light
source is on as the projection ray may cause a trouble on your eyes.
►Keep any object away from concentrated projection light beam. High
temperatures are generated when the light source is lit. Blocking the beam
causes high temperature and could result in fi re or smoke.
WARNING
►Do not approach or touch the lens or the ventilation
openings while using the projector or for a while after using it to prevent a
burn. Take care of ventilation.
►Do not place anything around the lens and ventilation openings of the projector.
►Do not attach anything onto the lens except the lens cover of this projector
because it could damage the lens, such as melting the lens.
CAUTION
(continued on next page)
(1)
(3)
(2)
(4)
(5)
(12)
(8)
(11)
(14)
(7)
(6)
(2)
(9)
(10)
(9)
(6)
(6)
(6)
(13)
