94
QM00971-1
SCREEN menu
Item
Description
MyScreen
You can capture an image for use as a MyScreen image which
can be used as the BLANK screen and START UP screen. Display
the image you want to capture before executing the following
procedure.
(1) Selecting this item displays a dialog
titled “MyScreen”. It asks you if you
start capturing an image from the
current screen.
Wait for the target image to be displayed, and press the
ENTER
or
INPUT
button when the image is displayed. The image
freezes and the frame for capturing appears.
To stop performing, press the
RESET
button on the remote
control.
(2) Using the ▲/▼/◄/► buttons adjusts
the frame position.
Move the frame to the position of the
image which you want to use. The frame
may not be able to be moved for some
input signals.
To start registration, press the
ENTER
or
INPUT
button on the remote control.
To restore the screen and return to the previous dialog, press the
RESET
button on the remote control.
Registration may take several minutes.
When the registration is completed, the registered screen and
the following message is displayed for several seconds:
“MyScreen registration is finished.”
If the registration failed, the following message is displayed:
“A capturing error has occurred. Please try again.”
• This function cannot be selected when ON is selected for the
MyScreen Lock item (
95
)
.
• This function cannot be selected when ON is selected for the
MyScreen PASSWORD item in SECURITY menu (
118
)
.
•
This function is unavailable for a signal from the
LAN, HDMI 1 / 2,
DisplayPort,
HDBaseT
or
3G-SDI
port.
(continued on next page)
