background image

(4) 

Safety Precautions

SAFETY PRECAUTIONS 

(Continued)

WARNING

 Ensure that all electrical wiring,  connections and grounding comply with 

applicable cords.  Properly connect the printer to its dedicated ground.

   Complete the above procedure to avoid electrical shock hazards.

 When welding, keep enough space between the IJ printer and the 

   welding work area to prevent the arc from starting a fire. Also, be sure to 

insulate the printhead and IJ printer frame to keep the welding current 
from flowing to the control section of the printer, and to make a separate 
ground connection for the printer.

 If you wish to receive ink particles in a beaker, for a printing test for 

example, use an electrically conductive beaker and connect the beaker 
securely to the ground. 

   Do not let the tip of the printing head enter the beaker. 

Ink particles used for printing are electrically charged. An ungrounded beaker 
has a gradually rising charge, possibly catching on or causing a fire.

Grounding

WARNING

 Use an AC voltage of 100 to120 V or 200 to 240 V ±10% only and a 

power frequency of 50 or 60 Hz only.

If the above requirements are not met, the electric parts may overheat and 
burn, creating a risk of fire or electric shock.

Cable Handling

Содержание IJ UX







































































































































































































































































Отзывы: