7
ENGLISH
ENTER
SET UP
SYSTEM
SURROUND
NEXT
• REMOTE CONTROL UNIT
FUNCTION selector button
System buttons (TAPE, VCR)
SYSTEM (SYSTEM SET UP) button
Test tone button
Surround mode selector button
Channel select button
System buttons
(CD, MD, DVD)
MD
DVD
DVD
TV
A/B
HTA
MD/TAPE
TAPE / VCR
CD/MD/DVD
FUNCTION
MD/
TAPE MON
POWER
VCR
VCR
TAPE
CD
PRESET
GROUP
CHANNEL
CHANNEL
DISPLAY
ENTER
SET UP
SYSTEM
SURROUND
TV INPUT
VOLUME
CHANNEL
T.TONE
CH SELECT
VIDEO SELECT
STATUS
SURR.MODE
REMOTE CONTROLLER
RB - DD1
MUTING
CH
VCL
TV
AUDIO
TITLE
MENU
NEXT
MASTER
VOL
Mode selector switch
POWER buttons
MD/TAPE MONITOR button
Preset memory select buttons
SURROUND
(surround parameter) button
MASTER VOLUME control
buttons
System buttons (TV)
MUTING button
STATUS button
CHANNEL VOLUME UP/
DOWN buttons
Cursor buttons
NEXT button
VIDEO SELECT button
•
These settings are required to set up the listening room’s AV system centered around the unit.
1
Set the slide switch to “CD” or “MD”.
2
Use the following buttons to set up the system:
MD
DVD
VCR
TAPE
CD
• System setup items and default values (set upon shipment from the factory)
System setup
Default settings
1
2
Speaker
Configuration
Delay Time
Input the combination of speakers in your
system and their corresponding sizes
(SMALL for regular speakers, LARGE for
full-size, full-range) to automatically set the
composition of the signals output from the
speakers and the frequency response.
This parameter is for optimizing the timing
with which the audio signals are produced
from the speakers and subwoofer
according to the listening position.
Front Sp.
Large
Center Sp.
Small
Surround Sp.
Small
Sub Woofer
Yes
Front & Sub Woofer
3.7 m
Center
3.7 m
Surround
3.1 m
• Playback with the above setting is possible upon shipment from the factory and after initializing (refer to page 22).
• SETTING UP THE SYSTEM
1.5V X 2 [IEC R6, "AA", JIS R6P (JIS SUM-3)]
BATTERY INSERTION
•
The remote control unit will operate from a direct distance of approximately 7 meters, but this distance
will be shortened if obstacles are present or if operated at an angle. (The remote control unit will operate at
an angle of up to 30° in either direction.)
SYSTEM (SYSTEM SET UP) button
Press this to display the system setup menu.
Also use this button to finish the setting on
the display.
NEXT button
Press this to switch the items.
SURROUND (surround parameter) button
Press this to display the surround parameter menu.
CURSOR buttons
and
: Use the cursor (
and
)
buttons to select the settings.
*1_007-010 HTA-DD3E_EN
7/29/02, 3:41 PM
7
