Hitachi HTADD3E, Инструкция по эксплуатации

Страница: 22 / 25

22
ENGLISH
TP Search
Use this function to find RDS stations broadcasting
traffic program (TP stations).
1
Set the input function to “TUNER”.
2
Press the RDS button until “TP SEARCH”
appears on the display.
3
Press the TUNING PRESET UP or DOWN
button to automatically begin the TP search
operation.
If no TP station is found with the above
operation, all the reception bands are
searched.
4
The station name is displayed on the display
after searching stops.
5
To continue searching, repeat step 3.
If no other TP station is found when all the
frequencies are searched, “NO TP” is
displayed.
TUNER
FUNCTION
DOWN CH
TUNING PRESET
UP
CHANNEL
RDS
MD DVD
DVD TV
A/B
HTA
MD/TAPE
TAPE / VCR
CD/MD/DVD
FUNCTION
MD/
TAPE MON
POWER
VCR
VCR
TAPE
CD
PRESET
GROUP
CHANNEL
CHANNEL
DISPLAY
MASTER
VOL
3
1
2
+ -
+ -
DOLBY
D I G I TA L
3
1
RT (Radio Text)
“RT” appears on the display when radio text data is
received.
When the RT button is pressed while receiving an RDS
broadcast station, the text data broadcast from the
station is displayed. To turn the display off, press the
RT button again. If no text data is being broadcast, “NO
TEXT DATA” is displayed.
RT
+ -
+ -
DOLBY
D I G I TA L
+ -
+ -
2 1, 2
DOLBY
D I G I TA L
• LAST FUNCTION MEMORY
• This unit is equipped with a last function memory which stores the input and output setting conditions as they
were immediately before the power is switched off.
• The unit is also equipped with a back-up memory. This function provides approximately one week of memory
storage when the main unit’s power switch is off and with the power cord disconnected.
• INITIALIZATION OF THE MICROPROCESSOR
• When the indication of the display is not normal or when the operation of the unit does not shows the reason-
able result, the initialization of the microprocessor is required by the following procedure.
X 3
1
Switch off the unit.
2
Hold the TUNER button and MEMORY button
and switch on the unit power.
3
Check that the entire display is flashing with
an interval of about 1 second, and release
your fingers from the 2 buttons and the
microprocessor will be initialized.
*1_021-024 HTA-DD3E_EN 7/29/02, 3:42 PM 22