Hitachi HTADD3E, Инструкция по эксплуатации

Страница: 19 / 25

19
ENGLISH
• LISTENING TO THE RADIO
Auto preset memory
This unit is equipped with a function for automatically searching for FM broadcast stations and storing them in the
preset memory.
1
Switch on the unit using the main unit’s power
operation switch while holding in the GROUP
button. The unit automatically begins searching
for FM broadcast stations.
2
When the first FM broadcast station is found,
that station is stored in the preset memory at
channel A1. Subsequent stations are
automatically stored in order at preset channels
A2 to A8, B1 to B8, C1 to C8, D1 to D8 and E1
to E8, for a maximum of 40 stations.
3
Channel A1 is tuned in after the auto preset
memory operation is completed.
NOTES:
• If an FM station cannot be preset automatically due to
poor reception, use the “Manual tuning” operation to
tune in the station, then preset it using the manual “Pre-
set memory” operation.
• To interrupt this function, press the power operation
button.
+ -
+ -
1 1
DOLBY
D I G I TA L
ON / STANDBY
OFF
GROUP
1
Set the input function to “TUNER”.
2
Watching the display, press the BAND button to
select the desired band (AM or FM).
3
Press the MODE button to set the auto tuning
mode.
4
Press and hold the TUNING UP or DOWN button
for one second.
• Automatic searching begins, then stops when
a station is tuned in or if the TUNING UP or
DOWN button is pressed during the search.
NOTE:
• When in the auto tuning mode on the FM band, the
“STEREO” indicator lights on the display when a ste-
reo broadcast is tuned in. At open frequencies, the noise
is muted and the “TUNED” and “STEREO” indicators
turn off.
Auto tuning
TUNER
BAND
MODE
AUTO
RDS
CH
DOWN UP
TUNING
1
2
3
4
+ -
+ -
DOLBY
D I G I TA L
1
Set the input function to “TUNER”.
2
Watching the display, press the BAND button
to select the desired band (AM or FM).
NOTE:
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO”
indicator turns off.
3
Press the MODE button to set the manual
tuning mode. Check that the display’s
“AUTO” indicator turn off.
4
Press the TUNING UP or DOWN button to
tune in the desired station.
The frequency changes continuously when
the button is held in.
Manual tuning
*1_019-020 HTA-DD3E_EN 7/29/02, 3:42 PM 19