Hitachi Freedom Storage Lightning 9900 V series Скачать руководство пользователя страница 57

Страница: 57 / 82

Hitachi Lightning 9900™ V Series Remote Console Error Codes

6005 8846

An internal error occurred.

An internal error has occurred. Please call the

Hitachi Data Systems Support Center.

E 4

6005 8847

An internal error occurred.

An internal error has occurred. Please call the

Hitachi Data Systems Support Center.

E 4

6005 8848

Please wait a few minutes and retry the Suspend

Pair(Pairsplit-r) operation.

The suspend pair (Pairsplit-r) operation failed. A

few minutes later, please refresh the screen,

confirm if the specified volumes are in the

permissible status, and then retry the operation.

I 4

6005 8849

Specified volume is not part of Remote Copy pair (Not

in Duplex(PAIR), Pending(COPY), Suspend(PSUS)

state).

The specified volume is not part of a TrueCopy

pair. Please check the volume.

I 4

6005 8850

Invalid RCU serial number, SSID, Link Address or

Controller ID.

Check the serial number, SSID and link address

of the RCU, and set the correct value. Then retry

the operation. If the same error occurs, contact

the Hitachi Data Systems Support Center.

E 4

6005 8851

Invalid R-VOL.

Please check the R-VOL status.

6005 8852

R-VOL status change failed after M-VOL status

change. Confirm R-VOL status.

Confirm the R-VOL status.

6005 8853

DataMigration volume pair cannot be terminated

because migration copy is in progress and the

specified volume may be online from HOST.

Data migration could not be started. Check the

status of the volume, because the specified

volume may be online, or migration copy may be

in progress.

I 4

6005 8854

Delete Pair(Pairsplit-S) operation failed because M-

VOL is in Simplex(SMPL) status.

The operation failed, because of one of the

following reasons:

1. The specified volume is simplex.

2. There is no duplex or duplex-pending or

suspend volume in the group. Verify the status,

and retry the operation.

I 4

6005 8855

Delete(Pairsplit-S) operation failed because specified

volume or other volume in the same group is in status

transition.

The operation failed, because of one of the

following reasons:

1. The specified volume or another volume in the

same group are deleting.

2. The specified volume or another volume in the

same group are suspending. Wait for the change

in status to be completed, then retry the

operation.

I 4

6005 8856

Delete Pair(Pairsplit-S) operation failed because

Consistency Time of CT Group is not determined by

SEQCHK.

The operation failed, because the status of the

C/T Group is SEQCHK. Retry the operation with

either the volume or the group option.

I 4

6005 8857

Some volumes were not deleted by the Delete

Pair(Pairsplit-S) operation.

The operation failed for one or more of the

volumes, because either the pair status of the

volume is SEQCHK or the consistency time of

the volume does not match the consistency time

of the C/T group. Verify the status of the failed

volumes. If necessary, retry the delete pair

operation with the volume or the group option.

I 4

6005 8858

All volumes were not deleted by the Delete

Pair(Pairsplit-S) operation.

The operation failed for all of the volumes,

because either the pair status of the volume is

SEQCHK or the consistency time of the volume

does not match the consistency time of the C/T

group. Verify the status of the failed volumes. If

necessary, retry the Delete Pair operation with

the volume or the group option.

I 4

Содержание Freedom Storage Lightning 9900 V series



















































































Результаты поиска

Содержание Freedom Storage Lightning 9900 V series

Отзывы:

Похожие инструкции для Freedom Storage Lightning 9900 V series

Бренды по названию

Популярные бренды

Hitachi Freedom Storage Lightning 9900 V series, Список кодов ошибок

Результаты поиска

Содержание Freedom Storage Lightning 9900 V series

Отзывы:

Похожие инструкции для Freedom Storage Lightning 9900 V series

Бренды по названию

Популярные бренды