Hitachi Freedom Storage Lightning 9900 V series, Список кодов ошибок

Страница: 19 / 82

Hitachi Lightning 9900™ V Series Remote Console Error Codes 11
0003 2003 An error occurred. If this problem persists, please call
the Support Center.
The size of CV is larger than the possible size. (It
is smaller than the minimum size, or is larger
than the maximum.) The error does not occur
normally because it is guarded in the screen.
Contact the program maker.
E 2
0003 2004 An error occurred. If this problem persists, please call
the Support Center.
The specified area in FlashAccess is beyond the
volume size. The error does not occur normally
because it is guarded in the screen. Contact the
program maker.
E 2
0003 2005 An error occurred. If this problem persists, please call
the Support Center.
The specified LU path does not exist. (You have
specified wrong path control index.) The error
does not occur normally because it is guarded in
the screen. Contact the program maker.
E 2
0003 2006 An error occurred. If this problem persists, please call
the Support Center.
The specified port does not exist. You have
specified a wrong port number. Or the specified
port type (exclusively for mainframe) cannot be
processed in this agent. The error does not
occur normally because it is guarded in the
screen. Contact the program maker.
E 2
0003 2009 An error occurred. If this problem persists, please call
the Support Center.
The specified value of the command device
setting is invalid. (The specified value is not in
the specification.) The error does not occur
normally because it is guarded in the screen.
Contact the program maker.
E 2
0003 2010 The LDEV is in use by the HOST, or an error occurred
in the server procedure.
Check if I/O from the host to target path/volume
does not occur.
E 6
0003 2011 You cannot perform processing because a volume
pair is being created for remote copy operations,
correction copy is in progress, or the LDEV is closed.
Release the volume pair or wait for a while and then
retry processing. If you still cannot perform
processing, please call the technical support center.
Check the DKC status (if it is blocked or not). If
the same error occurs again, call the service
personnel.
W 6
0003 2012 An error occurred. If this problem persists, please call
the Support Center.
The specified volume does not exist, or the
delete request was given to a volume where
FlashAccess is not specified. The error does not
occur normally because it is guarded in the
screen. Contact the program maker.
E 2
0003 2013 An error occurred. If this problem persists, please call
the Support Center.
The specified volume does not exist. (You have
specified wrong CU#:LDEV#) Or the LDEV
(exclusively for mainframe) cannot be procesed
in this agent. The error does not occur normally
because it is guarded in the screen. Contact the
program maker.
E 2
0003 2014 An error occurred. If this problem persists, please call
the Support Center.
There is no capacity left in the logical parity
group to create CV. The error does not occur
normally because it is guarded in the screen.
Contact the program maker.
E 2
0003 2015 An error occurred while connecting to the subsystem.
Please retry a little later.
Communication error occurs. If the same error
occurs despite retrying, call the service
personnel.
E 6
0003 2016 SNMP or SVP has lock, please try again later. Wait for a while and reissue the request. E 5
0003 2017 Network error detected; exclusive lock is released. Request again. (Re-execute exclusive lock start
request.)
E 2