Hitachi Freedom Storage Lightning 9900 V series Скачать руководство пользователя страница 54

Страница: 54 / 82

Chapter 1 Error Codes

6005 8804

Copy mode cannot be changed.

The resume pair operation failed. The volume

and the copy mode must be either both

asynchronous or both synchronous. Verify that

the status of the volume and the copy mode

match, then retry the operation.

I 4

6005 8805

CT Group is not active in the RCU.

The resume pair operation failed, because there

is no R-VOL in the C/T Group. Verify the status

of the C/T group in the MCU/RCU. If an M-VOL

exists, delete it and retry the add pair operation.

I 4

6005 8806

CT Group Option cannot be changed unless deleting

or suspending all asynchronous pairs in the group.

If you want to change the C/T group option (timer

type or time out), either delete all asynchronous

pairs in the group, or verify the status of the RCU

C/T Group option and set the same option as the

MCU.

I 4

6005 8807

Too many MCUs in this CT Group.

The add pair operation failed because there are

too many MCUs in this C/T group. If the timer

type is System, then 4 MCUs have already been

added. If the timer type is local or none, then 1

MCU has already been added.

I 4

6005 8808

Please retry. Add Pair(Paircreate)/Resume

Pair(Pairresync) operation after waiting a few minutes.

The add/resume pair operation failed, because

the either the specified volume or another

volume in the same group is being changed to

simplex or suspend status. Retry the operation

after the status change is completed.

I 4

6005 8809

Please wait. Retry Add Pair(Paircreate)/Resume

Pair(Pairresync) operation in a few minutes.

Add/resume pair operation failed. The specified

volume or another volume in the same group

being changed to simplex/suspend status in

RCU. A few minutes later, please renew and

check the TrueCopy screen and if specified

volume is in a permissible status please retry the

operation.

I 4

6005 8810 TrueCopy

–

S/390

Asynchronous function is not

installed in specified RCU.

Install TrueCopy Asynchronous in the RCU and

retry the operation.

I 4

6005 8811

This version does not support multiple CT Groups in

the RCU.

This microcode version does not support multiple

C/T groups in the RCU. Verify the status and

retry.

I 4

6005 8812

This version does not support combining TrueCopy –

S/390

Asynchronous pairs and Synchronous pairs in

the DKC subsystems(s).

The add pair operation failed. This version does

not support intermix of TrueCopy Asynchronous

pairs and Synchronous pairs in the same DKC.

Refresh the screen and confirm the Copy Mode

in the MCU and RCU.

I 4

6005 8813

Specified M-VOL is a ShadowImage-

S/390

/ShadowImage volume. This version does not

support it.

This microcode version does not support

ShadowImage, and the specified M-VOL is a

ShadowImage volume. Verify the status of the M-

VOL and retry.

I 4

6005 8814

Specified R-VOL is a ShadowImage-

S/390

/ShadowImage volume. This version does not

support it.

This microcode version does not support

ShadowImage, and the specified R-VOL is a

ShadowImage volume. Verify the status of the

R-VOL and retry.

I 4

6005 8815

TrueCopy Asynchronous function is not installed in

specified RCU.

Install the TrueCopy Asynchronous function in

the RCU, then retry the operation.

I 4

Содержание Freedom Storage Lightning 9900 V series



















































































Результаты поиска

Содержание Freedom Storage Lightning 9900 V series

Отзывы:

Похожие инструкции для Freedom Storage Lightning 9900 V series

Бренды по названию

Популярные бренды

Hitachi Freedom Storage Lightning 9900 V series, Список кодов ошибок

Результаты поиска

Содержание Freedom Storage Lightning 9900 V series

Отзывы:

Похожие инструкции для Freedom Storage Lightning 9900 V series

Бренды по названию

Популярные бренды