Hitachi Freedom Storage Lightning 9900 V series Скачать руководство пользователя страница 56

Страница: 56 / 82

Chapter 1 Error Codes

6005 8831

The specified R-VOL is already used as a

CruiseControl Reserve VOL.

Check the status of the specified R-VOL (S-VOL)

from HOST or SVP.

I 4

6005 8832

Please wait a few minutes and retry the Add Pair

(Paircreate) / Resume Pair (Pairresync) operation.

Please check the status of the specified M-VOL

(P-VOL), and then retry the Add Pair (Paircreate)

/ Resume Pair (Pairresync) operation in a few

minutes.

I 4

6005 8833

Please wait a few minutes and retry the Add Pair

(Paircreate) / Resume Pair (Pairresync) operation.

Please check the status of the specified R-VOL

(S-VOL), and then retry the Add Pair (Paircreate)

/ Resume Pair (Pairresync) operation in a few

minutes.

I 4

6005 8834

The Add Pair (Paircreate) operation failed because

you tried to create volume pairs which exceeded the

licensed capacity.

Refer to the license key and confirm the licensed

capacity of the volumes. If you need to create

more pairs, purchase a license key that allows

you to use a larger capacity.

E 4

6005 8835

The Add Pair (Paircreate) operation failed because

you tried to create volume pairs which exceeded the

licensed capacity of the RCU side.

Refer to the license key of the RCU side, and

confirm the licensed capacity of the volumes. If

you need to create more pairs, purchase a

license key that allows you to use a larger

capacity.

E 4

6005 8836

No additional volume pairs waiting for copy.

Please check the pair status and retry.

6005 8837

An internal error occurred.

An internal error has occurred. Please call the

Hitachi Data Systems Support Center.

E 4

6005 8838

Specified volume is not part of a Remote Copy pair. The specified volume is not part of a TrueCopy

pair. Please check the volume.

I 4

6005 8839

Invalid RCU serial number, SSID, Link Address or

Controller ID.

Check the serial number, SSID and link address

of the RCU, and set the correct value. Then retry

the operation. If the same error occurs, contact

the Hitachi Data Systems Support Center.

E 4

6005 8840

Suspend(Pairsplit-r) operation is not valid for R-VOL. Suspend mode is not valid for the R-VOL. Check

the volume and retry.

I 4

6005 8841

Invalid R-VOL.

Please check the R-VOL status.

6005 8842

R-VOL status change failed after M-VOL status

change. Confirm R-VOL status.

Confirm the R-VOL status.

6005 8843

Suspend(Pairsplit-r) operation failed because

specified volume or other volume in the same group is

not in permissible status.

The operation failed, because of one of the

following reasons:

1. The specified volume is simplex.

2. There is no duplex or duplex-pending volume

in the group.

3. Either the specified volume or another volume

in the same group are suspended. Verify the

status, and retry the operation.

I 4

6005 8844

Suspend(Pairsplit-r) operation failed because

specified volume or other volume in the same group is

in status transition.

The operation failed, because of one of the

following reasons:

1. The specified volume or another volume in the

same group are deleting.

2. The specified volume or another volume in the

same group are suspending. Wait for the change

in status to be completed, then retry the

operation.

I 4

6005 8845

Preset Suspension is effective in the CT Group.

Cancel the preset suspension in the C/T group,

then retry the operation.

I 4

Содержание Freedom Storage Lightning 9900 V series



















































































Результаты поиска

Содержание Freedom Storage Lightning 9900 V series

Отзывы:

Похожие инструкции для Freedom Storage Lightning 9900 V series

Бренды по названию

Популярные бренды

Hitachi Freedom Storage Lightning 9900 V series, Список кодов ошибок

Результаты поиска

Содержание Freedom Storage Lightning 9900 V series

Отзывы:

Похожие инструкции для Freedom Storage Lightning 9900 V series

Бренды по названию

Популярные бренды