background image

27

English

Setting Up the DVD video camera/recorder

Holding DVD video camera/recorder

Insert your right hand from the bottom of DVD
video camera/recorder up to the base of your
thumb.

Put your hand in a po-
sition where you can
easily operate the REC
button and the Zoom
lever.
Adjust the length of
hand strap so that the
DVD video camera/re-
corder is stable when
you press the REC but-
ton with your thumb.

Note

: Do not adjust the hand strap while holding

the DVD video camera/recorder: Doing this could
cause the DVD video camera/recorder to fall and
be damaged.

Caution

:

Do not lift the DVD video camera/re-

corder by holding the viewfinder or LCD moni-
tor: If the viewfinder or LCD monitor comes off,
the DVD video camera/recorder will fall.

Setups

This section explains preparations for recording - setting up the DVD video camera/recorder and
battery pack.

Pass the shoulder strap
through the shoulder
strap attachments.

Be sure to pass through
the 2 slots.

Be sure to pass through
the 2 slots.

Attaching Shoulder Strap

Содержание DZ-MV270A - Camcorder



















































































































Отзывы: