5 - 12
Disassembly and Reassembly > Disassembly
(10) Camera Block
Fig. 5-3-10
(a) Ground cable [A]
(b) Ground cable [B]
(c) FRT circuit board
(d) Flash unit
(e) Camera block
(f) Front block
Note:
Take great care when handling the camera block: The camera block contains the lens unit, which
is a precision component. Subjecting the lens unit to any impact, however slight, could result in a
fault.
Caution
The front block of DZ-BD7HA and DZ-BD70A incorporates a high-voltage fl ash unit.
Do electric shock prevention measures, such as wearing gloves, and take great care during work.
1) Remove the screw [C] and ground cable [A] (a) of FRT circuit board (c).
2) Remove the screw [B] and ground cable [B] (b) of Flash unit (d).
3) Remove the screw [A].
4) Remove the Camera block (e) from Front block (f) in the direction of the arrow.
Caution during disassembly and reassembly:
Attach the ground cable [A] from
fl
ash unit, and the ground cable [B] from FRT circuit board to
the speci
fi
ed positions.
;"=
;"=
;#=
;#=
;!=
F
E
;"=83ILVER
;#=-83ILVER
C
C
D
D
$ETAILEDVIEWOFGROUNDCABLE
ANDSCREWPOSITIONS
;!=-83ILVER
A
B
