Hitachi DKC910I Скачать руководство пользователя страница 85

Страница: 85 / 138

DKC910I

Hitachi Proprietary

[INST(RM)08-01-110]

Rev.3

INST(RM)08-01-110

(l)

The message

“

Is the LED to be removed turned on?

”

is displayed.

NOTE: Check the status of the SVP SHUTDOWN LED on the Additional SVP (see

Figure

8-4

When the SVP SHUTDOWN LED is on, select [Yes].

Then, go to

Step (n)

When the SVP SHUTDOWN LED is not on, select [No].

Then, go to

Step (m)

(m) <Removal of SVP>

The message

“

Check the location of the SVP and remove the SVP. (SVP-OPTION)

After the operation has completed, select [OK].

”

is displayed.

Go to

Step (3)

NOTE: Do not click [OK] in this step.

After completing the procedure for removing the SVP hardware, click [OK].

(n) <Removal of The Additional SVP>

The message

“

Remove the hardware from the removed part (SVP with the LED on). After the

operation has completed, select [OK].

”

is displayed.

Go to

Step (3)

NOTE: Do not click [OK] in this step.

After completing the procedure for removing the SVP hardware, click [OK].

Содержание DKC910I










































































































































Результаты поиска

Содержание DKC910I

Отзывы:

Бренды по названию

Популярные бренды

Hitachi DKC910I, Руководство по установке

Результаты поиска

Содержание DKC910I

Отзывы:

Бренды по названию

Популярные бренды