Hitachi C28WF540N, Руководство пользователя

Страница: 14 / 21

GB - 13 -
Tilt:
This feature is used to rotate the picture. Sometimes the
Earth’s own magnetic field may cause the picture to rotate. If
this happens, you can correct the picture tilt using this fea-
ture.
Install Menu
The Install Menu consist of the Tuning , Manual Setup and
TV Setup submenus.
Tuning Menu
• Press the “ MENU ” button, this takes you to the main
menu, then select Install using the “ “ or “ ” buttons.
• Press the “ MENU ” button, you are now in the main
menu. In the main menu, select INSTALL , using either of
the “ “ or “ ” buttons. (To enter the Install menu directly
just press the Blue button on the remote control hand set.)
• The Tuning submenu is selected by using the “ “ or “ ”
buttons and entered by pressing either of the “ “ or “ ”
buttons.
Automatic Search
• Programme is the first item on the list in the Tuning Menu.
It is entered by pressing either of the “ “ or “ ” buttons.
• Then decide the programme number where you want the
station to be stored by pressing either of the “ “ or “ ”
buttons. (You may instead type in the programme number
using the digit buttons.)
• Next select Band by using the “ “ or “ ” buttons and us-
ing the “ “ or “ ” buttons select the band to be
searched. (VHF-L, VHF-H or UHF)
• Select Search With the “ “ or “ ” buttons. Search can
be made either forward, by pressing “ ” button or back-
ward by pressing the “ “ button.
• When the tuning stops and the tuned station is not the de-
sired one, you can continue searching by pressing either of
the “
“ or “ ” buttons again.
• When the desired station is tuned, select STORE using the
“ “ or “ ” buttons and store it to the programme number
you previously selected by pressing either of the “ “ or
“ ” buttons.
• To stop searching before a station is found, press the re-
verse direction button (for example when searching forwards
press the backward direction button).
To name a Programme
• First select the programme number you want to name.
• Then select the name option using the “
“ or “ ” but-
tons.
• Next press either of the “ “ or “ ” buttons to set the
position of the letter to be changed and then press either of
the “
“ or “ ” buttons to change that letter.
• Then select and change the remaining letters and when fin-
ished select STORE using the “ “ or “ ” buttons and
store using the either of the “ “ or “ ” buttons.
Direct Channel Access
• If you know the broadcast band and channel number of the
station you want to tune, you do not need to make search;
select
Band , using “ “ or “ ” button in the TUNING
menu. Select the band of the station, pressing “ “ or
“ ” button. Then select Channel pressing “ “ or “ ”
button. Press “ “ or “ ” button to find the channel num-
ber or directly type it using the digit buttons. As you change
the channel numbers the corresponding stations will be dis-
played.
I : C01-C17, C21-C73
To store the station to the programme number selected, se-
lect
STORE option using “ “ or “ ” button and then press
“ “ or “ ” button to store it.
Now as you had selected the “Channel” , the tuning mode of
the program is stored as Channel Search Mode.
Note : Channel Search Tuning Mode uses a channel table.
The channels and stations at the table may vary from table to
table and from country to country. Each channel has an ex-
act frequency on the table.
• Frequency Search Tuning Mode does not use a channel
table and it is slower than Channel Search Tuning Mode.
• Channel Search Tuning Mode is recommended for the
countries which uses standard channel table.
• Frequency Search Tuning Mode recommended for the coun-
tries which uses non-standard channel table and recom-
mended to use instead of VST TUNERs.
Fine Tuning
In areas where the reception is weak the quality of the picture
and sound may be poor. In such cases, the picture and
sound quality can sometimes be improved by fine-tuning.
Fine Tuning is done as follows:
IB-ENG-PLL-STEREO-AK33-UK-(C28WF540N-C32WF540N-28&3217W).p65 29.08.2002, 13:07 13