Hitachi C28W440N, Руководство пользователя

Страница: 20 / 22

GB - 19 -
• Press “ ” button to move the Teletext screen back-
ward one page at a time.
For Fastext and Toptext
The subject-heading for the information may have a
particular colour or can be in a form located in a
coloured box.
• Press an appropriate RED, GREEN, YELLOW or
BLUE button in order to reach the relevant page
quickly.
For Toptext
If a Toptext transmission is present, colour coded but-
tons will appear in a status row.
If Toptext transmission is not present, status row will not
appear.
In Toptext mode the “ “ or “ ” commands will re-
quest the next or previous page. If Toptext transmission
is not available, in case of operation of these com-
mands, wraparound occurs. For example page 100
appears to be one greater than page 199.
To exit Teletext
• Press the "TV" button. The screen will change back
to the TV mode.
To Display the Time
• While watching a TV programme that has Teletext,
pressing the “ “ button will display the current time in
the upper right corner of the screen.
• If the programme being watched does not have Tele-
text a blue box will be displayed in the upper right cor-
ner of the screen.
• If the “ “ button is pressed the time information will
disappear.
The time information will disappear if a menu is entered
but will return when you exit that menu.
To Change the Picture Mode
You can change the picture mode by pressing the 16:9
(
) button. Available picture modes are; Auto, 4:3,
Widescreen, Letterbox, 14:9L and 14:9 Zoom.
Tips
Care of the Screen:
The screen is best cleaned with a damp soft cloth. Using
an abrasive material or solvents will damage the sur-
face of the TV screen.
Poor Picture:
• Make sure that you have selected the correct TV
Band. Is your TV located too close to loud speakers,
heating radiators or fluorescence lights.
• Mountains or high building can sometimes cause
double pictures or ghost images.
• The picture quality can sometimes be improved by
changing the direction of the aerial.
• The picture quality may be degraded if two pieces of
external equipment are connected to the TV at the
same time. In such a situation disconnect one of the
pieces of equipment.
No Picture:
• Is the aerial connected properly?
• Do the aerial plugs tightly fit the aerial sockets.
• Are the plugs tightly connected to the aerial cable.
• Is the aerial cable damaged.
• Have suitable plugs been used to connect the aerial
to the TV.
• If you are in any doubt, consult your dealer.
• No picture means that your TV is not receiving any
transmission. Have you pressed the correct buttons
on the remote control? Try once more.
Sound:
Sound is coming from only one of the speakers. Is the
balance set to one direction extreme? See SOUND
menu.
Remote Control not operating the TV:
If your TV does not respond to the remote control do the
following.
• Press the “TV” button on the remote control once
more.
• Check the batteries, they may be exhausted. If so
you can still use the controls on the front of the TV.
• Have you selected the wrong menu? Pressing the
“TV” button will return the TV to the TV mode or
press the “
MENU
” button to return to previous
menu.
No solution:
Switch your TV set OFF then back ON again. If this
does not work, call your dealer; never attempt to repair
the TV by yourself.