Hitachi C28W440N, Руководство пользователя

Страница: 16 / 22

GB - 15 -
• Then select and change the remaining letters and
when finished select STORE using the “ “ or “ ”
buttons and store using the either of the “ “ or
“ ” buttons.
To change Standard
(You can change this menu only between st andards
which your TV set supports.)
Pressing “ “ or “ ” button selects the Broadcast
Standard required. Then select the standard you want
pressing “ “ or “ ” button. When changing the stan-
dard this way, if the previous channel is not defined for
the new selected standard, then also the channel will be
changed to the first defined channel of that standard (For
example: When changing BG to K1 and the previous
channel is C12, after changing the standard, the chan-
nel will be C4, because the first defined channel of stan-
dard K1 is C4). After that, if it is returned to the previous
standard back, the channel will not be changed to the
previous one anymore (That means, in the example
above, when it is returned from K1 to BG again, the
channel will not change to C12 anymore and keep C4).
Defined channels for different standards are given as
following:
B/G : C01-C83, S01-S41
D/K : C01-C12, C21-C69, S01-S19, S22-S41
I* : C01-C17
I** : C01-C17, C21-C73, S01-S19, S22-S41
L/L’ : C01-C76, S01-S41
K1 : C04-C09
* U.K. I (UHF)
** IRELAND I (VHF, UHF)
Note : Channel Search Tuning Mode uses a channel
table. The channels and stations at the table may vary
from table to table and from country to countr y. Each
channel has an exact frequency on the table.
• Frequency Search Tuning Mode does not use a
channel table and it is slower than Channel Search
Tuning Mode.
• Channel Search Tuning Mode is recommended for
the countries which uses standard channel table.
• Frequency Search Tuning Mode recommended for
the countries which uses non-standard channel table
and recommended to use instead of VST TUNERs.
Direct Channel Access
• If you know the broadcast band and channel number
of the station you want to tune, you do not need to
make search; select
Band , using “ “ or “ ” button
in the TUNING menu. Select the band of the station,
pressing “
“ or “ ” button. Then select Channel
pressing “ “ or “ ” button. Press “ “ or “ ”
button to find the channel number or directly type it us-
ing the digit buttons. As you change the channel num-
bers the corresponding stations will be displayed.
To store the station to the programme number selected,
select
STORE option using “ “ or “ ” button and
then press “ “ or “ ” button to store it.
Now as you had selected the “Channel Search” , the
tuning mode of the program is stored as Channel
Search Mode.
Fine Tuning
In areas where the reception is weak the quality of the
picture and sound may be poor. In such cases, the pic-
ture and sound quality can sometimes be improved by
fine-tuning. Fine Tuning is done as follows:
Go to the Tuning menu and using the “ “ or “ ” but-
tons select Fine Tuning. Then press and hold the “ ”
button will cause the fine tuning to be carried out in the
forwards direction, pressing the “
“ button with cause
the tuning to be carried out in the opposite direction.
When you are satisfied with the reception of the trans-
mission store it. To store, select
STORE using the “ “
or “ ” buttons and store it by pressing either of the
“ “ or “ ” buttons.
• When you select " Frequency Search " , the display
of the Tuning menu will be as below :
• As " Frequency Search " is selected, TV will search
according to the channel frequencies.
• With the “ “ or “ ” button, select Search . Search
can be made either forward, pressing “ ” button or
backwards, pressing “ ” button.
• The search will be done with steps of 0.25MHz. in
each step.
• If the tuned station is not the desired one, you can
continue searching pressing “ “ or “ ” button
again.
• When the desired station is tuned, select “Store ”
using “ “ or “ ” button and store it to the program-
me number you selected pressing “ “ or “ ” but-
ton.
• Now as you had selected the " Frequency Search ",
the tuning mode of the program is stored as Fre-
quency Search Mode.
Direct Frequency Access
• If you know the broadcast band and the channel fre-
quency of the station you want to tune, you do not
need to make search; select Frequency, using
“ “
or “ ” button in the Frequency Mode Tuning Menu.
You can type the first 3 digit s of the frequency using
the digit buttons, and then you can select the decimal
part of the frequency by using
“ “ or “ ” buttons
with 250kHz steps. For example if you want to tune
the station at frequency 224.25 MHz; first you can di-
rectly type 224. The bar at bottom of the menu will
show 224.00 . Then by increasing or decreasing with